The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.
When the head gasket begins to fail, the engine may have no symptoms at all. They only begin to occur when the leak has reached an engine oil passage, engine coolant passage or the engine cylinder.
When that happens, the engine may be very difficult to start, and run roughly when idling. There may be oil or coolant leaking, and the engine may begin to overheat, or at least run hot. At this point, there may be coolant in the engine oil pan — this will look creamy and lighter in color than the oil. Also, the radiator or engine coolant reservoir may have a gurgling sound, the presence engine oil, or smell of combustion. And the check engine light will come on.
The coolant being burned in the engine will produce white exhaust that smells sweet, like engine coolant. When the head gasket fails completely, the engine will overheat within minutes of starting, will stall and then won't restart.
To effectively diagnose a coolant leak in your 2007 Chrysler Sebring, start with a thorough visual inspection of the vehicle. Look for any visible signs of coolant pooling under the car or around critical components such as the radiator, hoses, and water pump. If you don’t spot any obvious leaks, proceed to perform a pressure test on the cooling system, as this method can reveal hidden leaks that may not be immediately visible. Regularly checking the coolant level is also essential; a consistent drop in coolant can indicate a leak somewhere in the system. Don’t forget to inspect the radiator cap for any damage, as a faulty cap can lead to leaks. Additionally, examine all hoses and connections for any signs of wear, such as cracks or bulges, which could compromise the system. Pay special attention to the heater core, as leaks here can often go unnoticed. Lastly, if you observe white smoke from the exhaust, it may signal that coolant is leaking into the combustion chamber, indicating a more serious issue. By following this diagnostic approach, you can systematically identify and address coolant leaks in your vehicle.
When dealing with coolant leaks in a 2007 Chrysler Sebring, it's essential to understand the various common problems that may arise. A faulty radiator is often a primary culprit, as damage or corrosion can lead to significant leaks. Additionally, worn-out hoses are another frequent issue; over time, these hoses can deteriorate, resulting in leaks that compromise the cooling system. The water pump, responsible for circulating coolant, can also develop leaks as it ages, which can lead to a drop in coolant levels. In more severe cases, a cracked engine block may be the source of the leak, allowing coolant to escape from the engine itself. Furthermore, loose or damaged hose clamps can prevent proper sealing, contributing to leaks, while a faulty radiator cap can create pressure issues that exacerbate the problem. Addressing these issues promptly is crucial to prevent overheating and potential engine damage, making it vital for DIYers to be aware of these common causes when troubleshooting coolant leaks in their Sebring.
Addressing a coolant leak in a 2007 Chrysler Sebring is of utmost urgency due to the significant risks associated with neglecting this issue. Coolant plays a vital role in maintaining the engine's temperature, and a leak can quickly lead to overheating, which may result in severe engine damage. If the engine runs hot for an extended period, it can lead to catastrophic failures, necessitating expensive repairs or even complete engine replacement. Additionally, a coolant leak can diminish the vehicle's cooling capacity, further exacerbating the risk of overheating. It is also essential to recognize that a coolant leak may indicate underlying problems within the cooling system, such as a compromised radiator or a failing water pump. By addressing the leak promptly, you not only safeguard your engine's health but also prevent more extensive and costly repairs down the line. Therefore, if you notice any signs of a coolant leak, it is crucial to take immediate action to ensure the safe and efficient operation of your vehicle.
Not sure what's wrong?
Get help from a trusted expert
A failing heater core may cause the car's interior to smell like engine coolant. The smell will become worse when the heater is turned on. The engine may also begin to run hotter until the vehicle is repaired.
The worst-case scenario is the engine overheating, which can cause extensive engine damage.
If the heater core is clogged, the air that blows when the heater is turned on will not be very hot.
Problems with the intake manifold gasket can create the following symptoms:
» LEARN MORE: Intake manifold gasket symptoms
A failing radiator can cause the engine to run hot or overheat. Most radiators are made of metal and plastic. The plastic parts can become brittle and crack over time, causing a leak of coolant (typically green or pink in color). All manufacturers have a recommended service interval for coolant renewal. As the coolant ages, the additives breakdown and being to form solid deposits. These deposits will build up in the passages of the cooling system and will eventually clog components, including the radiator. A leaking or clogged radiator must be replaced. Some automatic transmission cars will also have a transmission cooler integrated into the radiator. Lines going to and from the transmission circulate transmission fluid to help cool the transmission in heavy duty applications such as towing or off-roading. If this integrated cooler fails, it can allow transmission fluid and coolant to mix. This will causing shifting issues in addition to overheating.
A coolant leak may be noted from the hoses. Coolant hoses can be damaged by oil leaks, or age. This will lead to swelling or cracking, it is suggested to replace the hoses before they begin leaking to avoid potential overheating.
The bad thermostat can cause two different sets of problems, depending on whether it's stuck open or stuck closed.
A thermostat that is stuck open can cause the engine to run colder than normal and turn on the check engine light. It may also cause poor fuel mileage and the heater to blow cool air.
A thermostat that is stuck closed will cause the vehicle to overheat. If a new thermostat doesn't resolve engine temperature problems, the cooling system needs to be checked for other issues.
» LEARN MORE: Signs of a bad thermostat, and how to fix it
If a vehicle is overheating, a bad thermostat could be the problem, and a damaged thermostat housing is more likely to produce a coolant leak, either from a cracked or warped housing or a failed seal to the engine. The thermostat housing can be made of metal or plastic. And the housing can be a stand-alone part that is separate from the thermostat, or (on later model vehicles) can be integrated with the thermostat and replaced as a single unit.
The two most common signs of a bad pump are leaks and noises.
Leaking water pumps can result in damage to the drive and timing belts, and cause the engine to overheat. A failed water pump can be caused by other problems in the cooling system, such as a bad thermostat, radiator or head gasket.
See what others are asking about their Chrysler Sebring. Get answers from RepairPal's community of auto experts and enthusiasts.
Read about related problems experienced by other Chrysler Sebring drivers like you.