Clutch problems due to insufficient clearance between slave cylinder and housing on Jeep Wrangler

If the clutch is slipping when the clutch disc is 2/3 worn or if the clutch slave cylinder dust boot is torn, there may be insufficient clearance between the clutch slave cylinder and the clutch housing. A 5mm shim is available from Jeep that is installed between the slave cylinder and the clutch housing.

RepairPal Verified
Average mileage: (–)
Drive Train affected: Manual Transmission
4 model years affected: 1990, 1991, 1992, 1993
4 people reported this problem
0 people shared problem details
Related Items:
The issue I have with my 95 Wrangler is when I push the clutch in at a stop sign or light, it i...
I replaced the slave cylinder on my jeep, but i have had air in the lines 2 since replacing it,...
Will replacing the clutch slave cylinder, and clutch master cylinder help if when shifting from 1st to 2nd it grinds ( in 2nd gear )
I recently replaced my clutch at only 36,000 miles and it continued to work intermittenly. Now...

Related Content