Ford Focus Cruise Control Isn't Working

Common Causes of Cruise Control Malfunctions in Your Ford Focus and How to Fix Them

Find Repair Location
Reviewed by
Andrew Hajjar
Written by RepairPal Car Genius
Updated January 14, 2025
0%
30% chance it's the
Sensor
0%
25% chance it's the
Control Module
0%
25% chance it's the
Throttle
0%
20% chance it's
Something else
The most common reasons a Ford Focus cruise control isn't working are failed control module, sensor or switch issues, or throttle actuation problems.
  • Sensor: A faulty or malfunctioning sensor can lead to incorrect readings, causing issues with engine performance or other systems relying on accurate data.
  • Control Module: A faulty control module can lead to erratic vehicle behavior or failure of various electronic systems due to improper signal processing.
  • Throttle: A faulty throttle body or a defective accelerator pedal position sensor may be causing inconsistent throttle response.
Proper diagnosis will determine the exact cause of your symptom, saving you money on unnecessary repairs. The diagnostic experts at RepairPal Certified shops have the right tools and experience to solve any symptom.

How much does it cost to fix a Ford Focus cruise control isn't working?

Common Repairs

The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.

When the throttle position sensor fails, the engine's computer tends to overcompensate with fuel, leading black exhaust coming from the tailpipe. There is a strong possibility of engine misfires, and the check engine light will come on.

Throttle position sensors can also develop "dead spots," or certain places along the throttle curve where it doesn't get a reading. When this happens, the above symptoms can occur but then stop when you further press or let off the gas pedal.

When the vehicle speed sensor fails or the wiring harness prevents signal transmission, the speedometer is the first thing that will stop functioning properly. This can be an intermittent issue where the speedometer only works occasionally, the speedometer may cease all function, or the speedometer may read erratically or incorrectly. Also, the traction control and anti lock brake warning lights specific to each vehicle may be illuminated, depending on the design of those systems. You may notice the vehicle hesitate to accelerate, cruise control will not function properly, and the vehicle may not shift properly through all of the gears.

In the event that a wheel speed sensor fails, the ABS, traction control system (TCS) and manufacturer specific stability control system lights will illuminate, informing the driver that the systems are disabled. The vehicle will be more prone to tire slip, and normal driving patterns may need to be adjusted to correct for the loss of computer control. On older vehicle's, the speedometer can be affected, causing illumination of the check engine light as well.

The cruise control switch can cause complete failure of the cruise control feature, but in a lucky scenario only partial functionality will be lost. This means that the cruise control may come on, but that it will not increase in speed automatically, or the cancel button does not work leading the driver to cancel cruise control with the foot brake. In some vehicles, the cruise control light may illuminate, or a warning message may be displayed due to lack of functionality.

Troubleshooting Cruise Control Issues in a Ford Focus

When addressing cruise control issues in your Ford Focus, it's essential to adopt a systematic diagnostic approach. Start by checking the simplest components, such as the fuse and brake light switch, as these are common culprits for cruise control malfunctions. If these elements are functioning correctly, proceed to perform a diagnostic test by turning the ignition on and off while pressing the cruise control buttons in a specific sequence. This will help you interpret the cruise control light's blinks, indicating where the problem may lie. If you suspect the cruise control switch itself is faulty, unplug it and test with a known working switch to confirm the issue. Additionally, inspect the wire harness around the steering wheel; while Ford may recommend a replacement, many users have successfully resolved issues by rewrapping the wires with electrical tape or reseating them. By following this methodical approach, you can efficiently identify and address the root cause of your cruise control problems, ensuring a smoother driving experience.

What Could Cause the Cruise Control to Malfunction in a Ford Focus?

When diagnosing cruise control malfunctions in a Ford Focus, it's essential to consider several common problems that may be at play. One of the primary culprits is a failed control module, which can disrupt the entire system's functionality. Additionally, issues with sensors or switches, particularly those related to throttle actuation, can prevent the cruise control from engaging properly. A faulty throttle position sensor is another significant factor; it can cause the engine's computer to mismanage fuel delivery, potentially leading to black exhaust emissions. Furthermore, blown fuses, the condition of the brake pedal, and the throttle body itself can all impact cruise control performance. To effectively troubleshoot, using a scanner to check the speed sensor's operation is advisable. A specific diagnostic test involving the ignition key and cruise control buttons can also help pinpoint the issue. Lastly, don't overlook the possibility of wiring problems, especially around the steering wheel, which may require further inspection. By understanding these common issues, DIYers can take informed steps toward diagnosing and resolving cruise control problems in their Ford Focus.

Why is the Cruise Control Not Working in a Ford Focus?

When the cruise control in your Ford Focus malfunctions, it’s crucial to address the issue promptly, as neglecting it can lead to safety risks and potentially more significant vehicle damage. A non-functioning cruise control system can distract you from maintaining proper speed, increasing the likelihood of accidents, especially on long drives. Common culprits such as a failed control module, faulty sensors, or issues with the brake pedal switch can compromise your vehicle's performance. Additionally, problems with the throttle control system or a blown fuse may exacerbate the situation, leading to more extensive repairs if left unchecked. Performing a thorough diagnostic test can help pinpoint the exact cause, allowing you to take corrective action before the problem escalates. Remember, timely intervention not only ensures your safety on the road but also helps maintain the longevity of your vehicle.

You’ve got options with RepairPal

Whether you need a more accurate auto repair estimate or help finding a reputable shop in your area, we’ve got you covered.