The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.
When the head gasket begins to fail, the engine may have no symptoms at all. They only begin to occur when the leak has reached an engine oil passage, engine coolant passage or the engine cylinder.
When that happens, the engine may be very difficult to start, and run roughly when idling. There may be oil or coolant leaking, and the engine may begin to overheat, or at least run hot. At this point, there may be coolant in the engine oil pan — this will look creamy and lighter in color than the oil. Also, the radiator or engine coolant reservoir may have a gurgling sound, the presence engine oil, or smell of combustion. And the check engine light will come on.
The coolant being burned in the engine will produce white exhaust that smells sweet, like engine coolant. When the head gasket fails completely, the engine will overheat within minutes of starting, will stall and then won't restart.
A failing heater core may cause the car's interior to smell like engine coolant. The smell will become worse when the heater is turned on. The engine may also begin to run hotter until the vehicle is repaired.
The worst-case scenario is the engine overheating, which can cause extensive engine damage.
If the heater core is clogged, the air that blows when the heater is turned on will not be very hot.
Problems with the intake manifold gasket can create the following symptoms:
» LEARN MORE: Intake manifold gasket symptoms
A failing radiator can cause the engine to run hot or overheat. Most radiators are made of metal and plastic. The plastic parts can become brittle and crack over time, causing a leak of coolant (typically green or pink in color). All manufacturers have a recommended service interval for coolant renewal. As the coolant ages, the additives breakdown and being to form solid deposits. These deposits will build up in the passages of the cooling system and will eventually clog components, including the radiator. A leaking or clogged radiator must be replaced. Some automatic transmission cars will also have a transmission cooler integrated into the radiator. Lines going to and from the transmission circulate transmission fluid to help cool the transmission in heavy duty applications such as towing or off-roading. If this integrated cooler fails, it can allow transmission fluid and coolant to mix. This will causing shifting issues in addition to overheating.
A coolant leak may be noted from the hoses. Coolant hoses can be damaged by oil leaks, or age. This will lead to swelling or cracking, it is suggested to replace the hoses before they begin leaking to avoid potential overheating.
The bad thermostat can cause two different sets of problems, depending on whether it's stuck open or stuck closed.
A thermostat that is stuck open can cause the engine to run colder than normal and turn on the check engine light. It may also cause poor fuel mileage and the heater to blow cool air.
A thermostat that is stuck closed will cause the vehicle to overheat. If a new thermostat doesn't resolve engine temperature problems, the cooling system needs to be checked for other issues.
» LEARN MORE: Signs of a bad thermostat, and how to fix it
If a vehicle is overheating, a bad thermostat could be the problem, and a damaged thermostat housing is more likely to produce a coolant leak, either from a cracked or warped housing or a failed seal to the engine. The thermostat housing can be made of metal or plastic. And the housing can be a stand-alone part that is separate from the thermostat, or (on later model vehicles) can be integrated with the thermostat and replaced as a single unit.
The two most common signs of a bad pump are leaks and noises.
Leaking water pumps can result in damage to the drive and timing belts, and cause the engine to overheat. A failed water pump can be caused by other problems in the cooling system, such as a bad thermostat, radiator or head gasket.
To effectively diagnose a coolant leak in your 2014 Chevrolet Impala, start by visually inspecting the area beneath your vehicle for any puddles of coolant, as this can provide immediate clues about the leak's location. Next, examine the hoses connected to the radiator and engine for any visible signs of wear, such as cracks or bulges, which could indicate a potential failure point. If no obvious leaks are found, consider performing a pressure test on the cooling system; this method can help reveal hidden leaks that may not be immediately visible. Additionally, inspect the radiator for any signs of corrosion or damage, as well as the water pump, which is another common source of leaks. Don’t forget to check the heater core and engine gaskets, as these components can also contribute to coolant loss. Throughout this process, keep an eye on your coolant levels, as monitoring changes can help you pinpoint the leak's source more effectively. By following this structured approach, you can systematically identify and address coolant leaks in your vehicle.
When dealing with coolant leaks in a 2014 Chevrolet Impala, it's essential to understand the common problems that may arise. One of the primary culprits is a damaged radiator, which can develop cracks or corrosion over time, leading to leaks. Additionally, worn-out hoses are another frequent issue; these rubber components can deteriorate due to heat and age, resulting in leaks that can be difficult to spot. A faulty water pump is also a potential source of coolant loss, as it may fail to maintain proper pressure, causing coolant to escape. Furthermore, loose or damaged hose clamps can prevent a secure seal, allowing coolant to seep out. In more severe cases, a cracked engine block can lead to significant leaks, necessitating immediate attention from a professional. Lastly, a leaking heater core can cause coolant to leak into the cabin, which is not only a nuisance but can also indicate a more serious problem. If you notice any signs of a coolant leak, such as puddles under your vehicle or a drop in coolant levels, it's crucial to investigate these common issues to prevent overheating and potential engine damage.
Addressing a coolant leak in a 2014 Chevrolet Impala is of utmost urgency due to the significant risks associated with neglecting this issue. Coolant plays a vital role in regulating engine temperature; a leak can lead to overheating, which may cause severe damage to engine components, resulting in costly repairs or even complete engine failure. Furthermore, an overheating engine can lead to unexpected breakdowns, compromising your safety on the road. Ignoring a coolant leak not only affects the vehicle's performance but can also decrease fuel efficiency and lead to further damage to other critical engine parts. Additionally, a coolant leak may indicate more serious problems within the cooling system, such as a failing water pump or a damaged radiator. Therefore, it is crucial to inspect and repair any coolant leaks promptly, ideally with the assistance of a qualified mechanic, to prevent escalating issues and ensure the safe operation of your vehicle.
Read about related problems experienced by other Chevrolet Impala drivers like you.
See what others are asking about their Chevrolet Impala. Get answers from RepairPal's community of auto experts and enthusiasts.
