2014 Chevrolet Impala Tire Pressure Warning Light Stays On

Tire Pressure Warning Light in 2014 Chevrolet Impala: Causes and Solutions

Find Repair Location
Reviewed by
Bo Fader
Written by RepairPal Car Genius
Updated January 14, 2025
0%
40% chance it's the
Tire Leaking Air
0%
30% chance it's the
Wheel Leaking Air
0%
15% chance it's the
Tire Pressure Monitoring System
0%
15% chance it's
Something else
The most common reasons a 2014 Chevrolet Impala tire pressure warning light stays on are a leaking tire, a wheel that no longer holds air, or a faulty tire pressure monitoring system.
  • Tire Leaking Air: A puncture, valve stem issue, or rim damage can cause a tire to leak air, leading to loss of pressure.
  • Wheel Leaking Air: A puncture or damage to the tire or rim can cause air to leak, resulting in a loss of tire pressure.
  • Tire Pressure Monitoring System: A malfunctioning tire pressure monitoring system can be caused by faulty sensors or a dead battery in the sensor units.
Proper diagnosis will determine the exact cause of your symptom, saving you money on unnecessary repairs. The diagnostic experts at RepairPal Certified shops have the right tools and experience to solve any symptom.

How much does it cost to fix a 2014 Chevrolet Impala tire pressure warning light stays on?

Common Repairs

The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.

When a tire pressure monitoring sensor fails, the tire pressure monitoring system control module will recognize a loss in communication and turn on the warning lamp which indicates the failure. This is most often the case. However, the tire pressure monitoring sensor may also fail by reporting incorrect tire pressures. This could cause a flat tire to go unrecognized, or a properly inflated tire to signal a low or high tire pressure warning.

When a relearn is needed, for any reason, the TPMS warning light will illuminate, and many vehicles will display a message relating to the TPMS system being inoperative or loosing communication. It is important to keep a watchful eye on tire pressures when this system is having issues because there is no warning available for underinflation or overinflation of the tires.

The only symptoms requiring diagnosis for the tire pressure monitoring system warning lamp is if the warning lamp has illuminated while the tires have correct air pressure, or if the air pressure for the tires is out of specification and the warning lamp is off. This is because the overwhelming majority of cases where the TPMS lamp illuminates is due to the change in ambient temperature.

What steps should I take to diagnose the tire pressure warning light issue in my 2014 Chevrolet Impala?

To effectively diagnose the tire pressure warning light issue in your 2014 Chevrolet Impala, begin with a thorough check of the tire pressure in all four tires using a reliable tire pressure gauge. This initial step is crucial as it ensures that each tire is inflated to the recommended PSI, which can typically be found in the owner's manual or on the driver's side door jamb sticker. Next, inspect the tires for any visible damage, such as punctures or bulges, and look for any foreign objects that may be lodged in the tread, as these can lead to air leaks. If you find that any tire is either overinflated or underinflated, adjust the pressure accordingly using an air compressor. After making these adjustments, it’s important to reset the Tire Pressure Monitoring System (TPMS) to ensure it accurately reflects the new tire pressures; refer to your owner's manual for specific reset instructions. Don’t overlook the spare tire, as it can also trigger the warning light if its pressure is low. If the warning light persists despite these checks and adjustments, it may indicate a more complex issue with the TPMS sensors or system, at which point seeking assistance from a certified mechanic or dealership is advisable for further diagnosis and repair. By following this systematic approach, you can effectively address the tire pressure warning light issue and ensure your vehicle's safety and performance.

What could be causing the tire pressure warning light to stay on in a 2014 Chevrolet Impala?

When the tire pressure warning light stays on in a 2014 Chevrolet Impala, it can indicate several underlying issues that are manageable for DIY enthusiasts. The most common reason is low tire pressure, so the first step is to check each tire and inflate them to the recommended levels found in the owner’s manual. If the pressure is adequate, the next area to investigate is the tire pressure sensors; a malfunctioning sensor may need replacement to ensure accurate readings. Additionally, if the sensors are not calibrated correctly, a simple recalibration can often resolve the issue. It's also important to check for any electrical problems within the tire pressure monitoring system, as damaged or corroded connections can lead to persistent warning lights. Lastly, if these steps do not resolve the issue, the control module of the tire pressure monitoring system may be faulty and could require repair or replacement. By methodically addressing these potential causes, you can troubleshoot and fix the tire pressure warning light in your Impala effectively.

What should I do if the tire pressure warning light on my 2014 Chevrolet Impala stays on?

When the tire pressure warning light on your 2014 Chevrolet Impala remains illuminated, it is crucial to take immediate action to ensure your safety and the longevity of your vehicle. Ignoring this warning can lead to unsafe driving conditions, such as reduced traction and increased tire wear, which may ultimately result in a blowout or loss of control while driving. Start by checking the tire pressure in all four tires with a reliable gauge, ensuring that each tire is inflated to the recommended levels found in your owner’s manual or on the sticker inside the driver’s side door jamb. If you discover that any tires are under-inflated, promptly inflate them to the correct pressure. Additionally, inspect the tires for any visible damage, such as punctures or bulges, as these can compromise your safety and may necessitate tire replacement. After addressing the tire pressure, it’s important to reset the tire pressure monitoring system (TPMS) according to your vehicle’s manual. If the warning light persists despite these efforts, it may indicate a malfunction within the TPMS itself, warranting a visit to a qualified mechanic for further diagnosis and repair. Taking these steps not only enhances your safety on the road but also helps prevent costly repairs down the line.

You’ve got options with RepairPal

Whether you need a more accurate auto repair estimate or help finding a reputable shop in your area, we’ve got you covered.