Unperformed "Idle Learn" Procedure May Cause Stalling Issue on Chevrolet Lumina

A stalling issue may occur if the battery goes dead or is disconnected and the "idle learn" procedure is not performed. For more information on "relearning" the engine idle speed, please click here»

RepairPal Verified
Average mileage: 70,000 (70,000–70,000)
Engine affected: 3.1L V6
4 model years affected: 1990, 1991, 1992, 1993
6 people reported this problem
2 people shared problem details
1992 Chevrolet Lumina- 3.1L V6
Problems with throttle body car would crank but wouldn't stay idle had to make it relearn idle. Here's how to do this keep cranking it several times or more one hint about this do not pump the peddle keep foot off let computer do the work so it can learn the throttle position , just keep turning the key on then off all the way off and keep doing this till it crankup remember dont touch the peddle let it idle on its on.I am a auto tech,, Taken auto technology coarse now to get my ase certification
1993 Chevrolet Lumina- 3.1L V670,000
had to change out the battery and then the alternator and the car refuses to set the computer in the car it is very frustrating
Related Items:
Body: A dirty throttle body may cause a lower than normal engine idle resulting in a stalling...
once i try and give it some throttle it bogs and dies out. as long as i dont touch the gas peda...
After started up the engine, the rpm gauge initially drops to about 600 rpm, then recovers to t...
I have changed the cam and crankshaft sensor ,i have changed the ingnition module th...
the rough idle is from start to warmed up. when accelerating it surges? unless floored. recentl...

Related Content