Get the latest advice about your car

Get Started
Advice » Problem Reports » Check for loose connection on starter solenoid if engine won't crank

Problem Reports

Dodge Ram 2500

Report: Check for loose connection on starter solenoid if engine won't crank

Dodge Ram 2500 Problem
3 Reports
Me Too Edit

Model Years Affected: 1995, 1996, 1997

Verified

If the engine will not crank when the key is turned to "Start," check for a loose connection on the starter solenoid before replacing the starter or battery cable.

Add to My Checklist
Find a Shop
Related Items:
  • Numerous Conditions May Cause Engine to Crank But Not Start
    If the engine is difficult to start or cranks but does not start, it can be caused by a leak in the return side of the fuel system. This type of leak can allow air to enter the injection pump resul...

    Common Problems > Dodge Ram 2500

  • Inspect Fuses if Engine Cranks But Does Not Start
    If the engine cranks but does not start, or starts and stalls, the fuses should be inspected, especially the power door locks fuse. The power door lock fuse provides power to a module that sends th...

    Common Problems > Dodge Ram 2500

  • ck won't start, and if it turns over it won't stay started.
    The truck stopped working, it won't start up and stay started. We have replaced the Idle Air control valve, the mass airflow sensor and all plkugs. We need possible suggestions for wh...

    Q&A > Dodge > 1998 Dodge Ram 2500

  • High beams won't turn on
    The high beams won't turn on. Replaced the bulbs, still don't work. The high beam indicator lig...

    Q&A > Dodge > 2001 Dodge Ram 2500

  • A/C won't blow cold air after being repaired
    I have had many parts replaced on A/C but it still won't blow cold air. Compressor kicks on, system is fully charged.

    Q&A > Dodge > 1999 Dodge Ram 2500

Ask a Question