2002 Mitsubishi Diamante Cruise Control Isn't Working

Common Causes of Cruise Control Malfunctions in Your 2002 Mitsubishi Diamante and How to Fix Them

Find Repair Location
Reviewed by
Devin Cabugcal
Written by RepairPal Car Genius
Updated January 14, 2025
0%
30% chance it's the
Sensor
0%
25% chance it's the
Control Module
0%
25% chance it's the
Throttle
0%
20% chance it's
Something else
The most common reasons a 2002 Mitsubishi Diamante cruise control isn't working are failed control module, sensor or switch issues, or throttle actuation problems.
  • Sensor: A faulty or malfunctioning sensor can lead to incorrect readings, causing issues with engine performance or other systems relying on accurate data.
  • Control Module: A faulty control module can lead to erratic vehicle behavior or failure of various electronic systems due to improper signal processing.
  • Throttle: A faulty throttle body or a defective accelerator pedal position sensor may be causing inconsistent throttle response.
Proper diagnosis will determine the exact cause of your symptom, saving you money on unnecessary repairs. The diagnostic experts at RepairPal Certified shops have the right tools and experience to solve any symptom.

How much does it cost to fix a 2002 Mitsubishi Diamante cruise control isn't working?

Common Repairs

The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.

When the throttle position sensor fails, the engine's computer tends to overcompensate with fuel, leading black exhaust coming from the tailpipe. There is a strong possibility of engine misfires, and the check engine light will come on.

Throttle position sensors can also develop "dead spots," or certain places along the throttle curve where it doesn't get a reading. When this happens, the above symptoms can occur but then stop when you further press or let off the gas pedal.

When the vehicle speed sensor fails or the wiring harness prevents signal transmission, the speedometer is the first thing that will stop functioning properly. This can be an intermittent issue where the speedometer only works occasionally, the speedometer may cease all function, or the speedometer may read erratically or incorrectly. Also, the traction control and anti lock brake warning lights specific to each vehicle may be illuminated, depending on the design of those systems. You may notice the vehicle hesitate to accelerate, cruise control will not function properly, and the vehicle may not shift properly through all of the gears.

In the event that a wheel speed sensor fails, the ABS, traction control system (TCS) and manufacturer specific stability control system lights will illuminate, informing the driver that the systems are disabled. The vehicle will be more prone to tire slip, and normal driving patterns may need to be adjusted to correct for the loss of computer control. On older vehicle's, the speedometer can be affected, causing illumination of the check engine light as well.

If the cruise control refuses to turn on at all, the actuator could be at fault. Likewise, if the cruise control stays on but does not maintain a consistent speed, the problem could be a bad actuator. In extreme cases, a malfunctioning actuator could cause the throttle to stick and prevent the vehicle from slowing down. These symptoms may point to a bad actuator. They may also point to other problems with the cruise control and related systems.

The cruise control switch can cause complete failure of the cruise control feature, but in a lucky scenario only partial functionality will be lost. This means that the cruise control may come on, but that it will not increase in speed automatically, or the cancel button does not work leading the driver to cancel cruise control with the foot brake. In some vehicles, the cruise control light may illuminate, or a warning message may be displayed due to lack of functionality.

What are the steps to diagnose the non-functioning cruise control in a 2002 Mitsubishi Diamante?

To effectively diagnose the non-functioning cruise control in your 2002 Mitsubishi Diamante, start with a systematic approach that prioritizes simpler checks before moving on to more complex diagnostics. Begin by inspecting the fuse associated with the cruise control system, as a blown fuse is a common and easily fixable issue. Next, assess the cruise control switch to ensure it is operational; a malfunctioning switch can prevent the system from engaging. Following this, examine the brake pedal switch, which is crucial for disengaging the cruise control when brakes are applied; if this switch is faulty, it can disable the entire system. The vehicle speed sensor is another critical component to check, as it provides necessary data for the cruise control to function correctly. If these initial checks do not reveal the problem, use a diagnostic scanner to identify any error codes that may indicate specific issues within the system. Finally, inspect the wiring and connections for any signs of damage or loose connections, as these can significantly impact the cruise control's performance. By following this structured diagnostic approach, you can efficiently identify and address the root cause of the cruise control malfunction in your vehicle.

What are the common problems that could cause the cruise control to stop working in a 2002 Mitsubishi Diamante?

When troubleshooting the cruise control system in a 2002 Mitsubishi Diamante, it's essential to understand the common problems that may lead to its malfunction. One of the primary culprits could be a faulty cruise control switch, which may prevent the system from engaging or disengaging as intended. Additionally, a blown fuse can disrupt the electrical flow necessary for the cruise control to operate, while vacuum leaks can interfere with the system's pressure, causing it to fail. Another critical component is the speed sensor; if it is defective, it can provide inaccurate speed readings, leading to cruise control issues. The brake light switch also plays a vital role, as a malfunction here can prevent the cruise control from engaging, given that it is designed to disengage when the brake pedal is pressed. Lastly, inspect the throttle cable for any signs of wear or damage, as issues with this component can hinder the cruise control's ability to maintain a steady speed. By identifying these potential problems, you can take the first steps toward diagnosing and fixing the cruise control system in your vehicle.

How urgent is it to address the non-functioning cruise control in a 2002 Mitsubishi Diamante?

When it comes to the non-functioning cruise control in a 2002 Mitsubishi Diamante, understanding the urgency of the situation is crucial for maintaining both safety and comfort on the road. While this issue may not pose an immediate threat to the vehicle's drivability, it can significantly detract from the overall driving experience, especially during long journeys where cruise control is particularly beneficial. Ignoring this problem could lead to increased frustration for the driver, as the convenience of maintaining a steady speed is lost. Moreover, delaying repairs might allow the issue to escalate, potentially resulting in more complex and costly repairs down the line. Therefore, while it may not be as critical as addressing brake or engine problems, it is advisable to resolve the cruise control malfunction promptly to ensure a smoother, more enjoyable driving experience and to prevent further complications.

You’ve got options with RepairPal

Whether you need a more accurate auto repair estimate or help finding a reputable shop in your area, we’ve got you covered.