The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.
When the throttle position sensor fails, the engine's computer tends to overcompensate with fuel, leading black exhaust coming from the tailpipe. There is a strong possibility of engine misfires, and the check engine light will come on.
Throttle position sensors can also develop "dead spots," or certain places along the throttle curve where it doesn't get a reading. When this happens, the above symptoms can occur but then stop when you further press or let off the gas pedal.
When the vehicle speed sensor fails or the wiring harness prevents signal transmission, the speedometer is the first thing that will stop functioning properly. This can be an intermittent issue where the speedometer only works occasionally, the speedometer may cease all function, or the speedometer may read erratically or incorrectly. Also, the traction control and anti lock brake warning lights specific to each vehicle may be illuminated, depending on the design of those systems. You may notice the vehicle hesitate to accelerate, cruise control will not function properly, and the vehicle may not shift properly through all of the gears.
In the event that a wheel speed sensor fails, the ABS, traction control system (TCS) and manufacturer specific stability control system lights will illuminate, informing the driver that the systems are disabled. The vehicle will be more prone to tire slip, and normal driving patterns may need to be adjusted to correct for the loss of computer control. On older vehicle's, the speedometer can be affected, causing illumination of the check engine light as well.
If the cruise control refuses to turn on at all, the actuator could be at fault. Likewise, if the cruise control stays on but does not maintain a consistent speed, the problem could be a bad actuator. In extreme cases, a malfunctioning actuator could cause the throttle to stick and prevent the vehicle from slowing down. These symptoms may point to a bad actuator. They may also point to other problems with the cruise control and related systems.
The cruise control switch can cause complete failure of the cruise control feature, but in a lucky scenario only partial functionality will be lost. This means that the cruise control may come on, but that it will not increase in speed automatically, or the cancel button does not work leading the driver to cancel cruise control with the foot brake. In some vehicles, the cruise control light may illuminate, or a warning message may be displayed due to lack of functionality.
A faulty cruise control module will simply result in deactivation of cruise control settings. This is because a detected error in the cruise control system could lead to hazardous driving conditions, so the module will be disabled, and the cruise control system warning light will be displayed. This will be a different message depending on make and model, and a warning light or message may be displayed on the driver instrument cluster.
When troubleshooting cruise control issues in your Mitsubishi Diamante, begin with the simplest potential problems. First, ensure that the cruise control switch is functioning correctly; a faulty switch can prevent the system from engaging. Next, check the brake lights, as any malfunction here can disrupt the cruise control circuit. If you've recently installed LED bulbs in the tail lights, consider reverting to standard bulbs, as these can sometimes cause electrical issues. Additionally, inspect the gas cap to confirm it is tightly secured, as a loose cap can trigger warning lights that affect cruise control functionality. If these initial checks do not resolve the issue, move on to examining the throttle actuation and the control module, as these components are crucial for the system's operation. Lastly, don't overlook the importance of the EVAP purge valve and mass air flow sensor, as problems with these parts can also impact cruise control performance. By following this diagnostic approach, you can systematically identify and address the root cause of your cruise control issues, ensuring a safer driving experience.
When dealing with cruise control malfunctions in a Mitsubishi Diamante, it's essential to understand the common problems that may arise. A failed control module, sensor, or switch can often be the root cause, leading to a complete failure of the system. Additionally, throttle actuation issues, particularly with the throttle position sensor, can cause the engine's computer to mismanage fuel delivery, resulting in noticeable black exhaust emissions. Other potential culprits include blown fuses, which can disrupt electrical connections, and brake pedal position sensor failures that may prevent the cruise control from engaging properly. Throttle body malfunctions and issues with the PRNDL or shifter position switch can also contribute to the problem. In older models, a defective brake pedal switch, problems within the throttle control system, or even a broken vacuum line can lead to cruise control failure. It's crucial to address these issues promptly, as a sudden malfunction can pose safety risks, including rapid deceleration. Therefore, maintaining awareness while driving, even with cruise control activated, is vital for safety.
When the cruise control in your Mitsubishi Diamante is not functioning, it is crucial to address the problem promptly, as neglecting it can lead to safety risks and further vehicle damage. A faulty cruise control switch may prevent the system from engaging, while a blown fuse can completely disable it. Additionally, a malfunctioning speed sensor disrupts the system's ability to maintain a steady speed, which can be particularly dangerous on highways. Vacuum leaks can compromise the system's pressure, leading to failure, and a defective brake light switch may inadvertently disengage the cruise control when it should be active. Furthermore, issues with the throttle cable can hinder the system's performance, making it difficult to maintain the desired speed. Given these potential hazards, it is advisable to diagnose and repair any cruise control issues as soon as they arise, ensuring both your safety and the optimal functioning of your vehicle.
Read about related problems experienced by other Mitsubishi Diamante drivers like you.
See what others are asking about their Mitsubishi Diamante. Get answers from RepairPal's community of auto experts and enthusiasts.