The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.
When the head gasket begins to fail, the engine may have no symptoms at all. They only begin to occur when the leak has reached an engine oil passage, engine coolant passage or the engine cylinder.
When that happens, the engine may be very difficult to start, and run roughly when idling. There may be oil or coolant leaking, and the engine may begin to overheat, or at least run hot. At this point, there may be coolant in the engine oil pan — this will look creamy and lighter in color than the oil. Also, the radiator or engine coolant reservoir may have a gurgling sound, the presence engine oil, or smell of combustion. And the check engine light will come on.
The coolant being burned in the engine will produce white exhaust that smells sweet, like engine coolant. When the head gasket fails completely, the engine will overheat within minutes of starting, will stall and then won't restart.
A failing heater core may cause the car's interior to smell like engine coolant. The smell will become worse when the heater is turned on. The engine may also begin to run hotter until the vehicle is repaired.
The worst-case scenario is the engine overheating, which can cause extensive engine damage.
If the heater core is clogged, the air that blows when the heater is turned on will not be very hot.
Problems with the intake manifold gasket can create the following symptoms:
» LEARN MORE: Intake manifold gasket symptoms
A failing radiator can cause the engine to run hot or overheat. Most radiators are made of metal and plastic. The plastic parts can become brittle and crack over time, causing a leak of coolant (typically green or pink in color). All manufacturers have a recommended service interval for coolant renewal. As the coolant ages, the additives breakdown and being to form solid deposits. These deposits will build up in the passages of the cooling system and will eventually clog components, including the radiator. A leaking or clogged radiator must be replaced. Some automatic transmission cars will also have a transmission cooler integrated into the radiator. Lines going to and from the transmission circulate transmission fluid to help cool the transmission in heavy duty applications such as towing or off-roading. If this integrated cooler fails, it can allow transmission fluid and coolant to mix. This will causing shifting issues in addition to overheating.
A coolant leak may be noted from the hoses. Coolant hoses can be damaged by oil leaks, or age. This will lead to swelling or cracking, it is suggested to replace the hoses before they begin leaking to avoid potential overheating.
The bad thermostat can cause two different sets of problems, depending on whether it's stuck open or stuck closed.
A thermostat that is stuck open can cause the engine to run colder than normal and turn on the check engine light. It may also cause poor fuel mileage and the heater to blow cool air.
A thermostat that is stuck closed will cause the vehicle to overheat. If a new thermostat doesn't resolve engine temperature problems, the cooling system needs to be checked for other issues.
» LEARN MORE: Signs of a bad thermostat, and how to fix it
If a vehicle is overheating, a bad thermostat could be the problem, and a damaged thermostat housing is more likely to produce a coolant leak, either from a cracked or warped housing or a failed seal to the engine. The thermostat housing can be made of metal or plastic. And the housing can be a stand-alone part that is separate from the thermostat, or (on later model vehicles) can be integrated with the thermostat and replaced as a single unit.
The two most common signs of a bad pump are leaks and noises.
Leaking water pumps can result in damage to the drive and timing belts, and cause the engine to overheat. A failed water pump can be caused by other problems in the cooling system, such as a bad thermostat, radiator or head gasket.
To effectively diagnose a coolant leak in your 2018 Mazda CX-9, start by checking for any visible puddles of coolant beneath your vehicle, as this can provide immediate clues about the leak's location. Next, inspect the hoses and connections for any signs of wear or damage, as these are common culprits for leaks. If no obvious issues are found, consider performing a pressure test on the cooling system, which can help pinpoint hidden leaks. Pay close attention to the radiator, as corrosion or cracks can lead to coolant loss. Additionally, examine the water pump and heater core for any signs of leakage, as these components are critical to the cooling system's function. Finally, inspect the head gasket for any damage, as a compromised gasket can lead to significant coolant loss. Throughout this process, monitor your coolant levels regularly to identify any consistent drops, which can further indicate the presence of a leak. By following this structured approach, you can efficiently diagnose and address coolant leaks in your vehicle.
When dealing with coolant leaks in a 2018 Mazda CX-9, it's essential to understand the common culprits that may be at play. One frequent issue is a damaged radiator, which can develop cracks or corrosion over time, leading to leaks. Additionally, a faulty water pump can be problematic; if the pump or its gasket fails, it can result in coolant escaping. Worn-out hoses are another concern, as they can deteriorate and create leaks due to age and wear. It's also important to check the hose clamps; if they are loose or damaged, they may not hold the hoses securely, causing leaks. In more severe cases, a cracked engine block can lead to significant coolant loss, while a leaking heater core can also contribute to the problem. Addressing these issues promptly is crucial to prevent overheating and potential engine damage, so if you notice any signs of a coolant leak, consider inspecting these components or consulting a qualified mechanic for assistance.
Addressing a coolant leak in your 2018 Mazda CX-9 is of utmost importance to prevent severe engine damage. Coolant plays a vital role in maintaining optimal engine temperature; without it, your engine is at risk of overheating. This overheating can lead to catastrophic failures such as warped cylinder heads, blown head gaskets, or even a cracked engine block, all of which can result in costly repairs. Moreover, if left unchecked, a coolant leak can escalate to the point where the engine seizes, necessitating a complete engine replacement. Regularly inspecting for signs of coolant leaks and taking immediate action is essential not only for the longevity of your vehicle but also for your safety on the road. Ignoring this issue can lead to significant financial burdens and the inconvenience of being stranded, making it critical to address any signs of a coolant leak as soon as they are detected.
Read about related problems experienced by other Mazda CX-9 drivers like you.
See what others are asking about their Mazda CX-9. Get answers from RepairPal's community of auto experts and enthusiasts.
