2010 Honda Odyssey Cruise Control Isn't Working

Common Causes of Cruise Control Malfunctions in Your 2010 Honda Odyssey and How to Fix Them

Find Repair Location
Reviewed by
Devin Cabugcal
Written by RepairPal Car Genius
Updated January 14, 2025
0%
30% chance it's the
Sensor
0%
25% chance it's the
Control Module
0%
25% chance it's the
Throttle
0%
20% chance it's
Something else
The most common reasons a 2010 Honda Odyssey cruise control isn't working are failed control module, sensor or switch issues, or throttle actuation problems.
  • Sensor: A faulty or malfunctioning sensor can lead to incorrect readings, causing issues with engine performance or other systems relying on accurate data.
  • Control Module: A faulty control module can lead to erratic vehicle behavior or failure of various electronic systems due to improper signal processing.
  • Throttle: A faulty throttle body or a defective accelerator pedal position sensor may be causing inconsistent throttle response.
Proper diagnosis will determine the exact cause of your symptom, saving you money on unnecessary repairs. The diagnostic experts at RepairPal Certified shops have the right tools and experience to solve any symptom.

How much does it cost to fix a 2010 Honda Odyssey cruise control isn't working?

Common Repairs

The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.

In the event that a wheel speed sensor fails, the ABS, traction control system (TCS) and manufacturer specific stability control system lights will illuminate, informing the driver that the systems are disabled. The vehicle will be more prone to tire slip, and normal driving patterns may need to be adjusted to correct for the loss of computer control. On older vehicle's, the speedometer can be affected, causing illumination of the check engine light as well.

The cruise control switch can cause complete failure of the cruise control feature, but in a lucky scenario only partial functionality will be lost. This means that the cruise control may come on, but that it will not increase in speed automatically, or the cancel button does not work leading the driver to cancel cruise control with the foot brake. In some vehicles, the cruise control light may illuminate, or a warning message may be displayed due to lack of functionality.

What are the steps to diagnose the non-functioning cruise control in a 2010 Honda Odyssey?

To effectively diagnose the non-functioning cruise control in a 2010 Honda Odyssey, start with a systematic approach that prioritizes simpler checks before moving on to more complex diagnostics. Begin by inspecting the cruise control fuse located in the fuse box, as a blown fuse is a common and easily fixable issue that can disrupt the system. Next, examine the cruise control buttons on the steering wheel for any signs of damage or sticking, as these can prevent the system from engaging properly. Following this, verify the functionality of the speed sensor, since a malfunction here can directly impact cruise control performance. It's also crucial to check the brake pedal switch, as a faulty switch can disable the cruise control when the brake is applied. If these initial checks do not reveal the problem, use an OBD-II scanner to look for any error codes that may indicate specific issues within the cruise control system. Finally, assess the cruise control module itself to ensure it is receiving power and operating correctly, as a defective module can lead to complete system failure. By following this structured diagnostic approach, you can efficiently identify and address the root cause of the cruise control malfunction in your vehicle.

What are the common problems that could cause the cruise control to stop working in a 2010 Honda Odyssey?

When the cruise control in your 2010 Honda Odyssey ceases to function, it can be frustrating, but understanding the common problems can help you diagnose the issue. One frequent culprit is a failed control module, which is essential for the cruise control system's operation. Additionally, issues with sensors or switches can disrupt the system's functionality, so checking these components is crucial. Throttle actuation problems may also arise, preventing the system from maintaining speed. A blown fuse can easily go unnoticed but is a simple fix that can restore functionality. Furthermore, a defective brake pedal switch can inadvertently signal the system to disengage, while faulty wiring may lead to intermittent issues. Lastly, worn-out parts or software glitches can contribute to the malfunction. By systematically examining these areas, you can identify the root cause and take the necessary steps to repair your cruise control system, ensuring a smoother driving experience.

How urgent is it to address the malfunctioning cruise control in my 2010 Honda Odyssey?

When it comes to addressing a malfunctioning cruise control in your 2010 Honda Odyssey, understanding the urgency of the situation is crucial. While minor issues, such as a blown fuse or a faulty brake switch, may not pose immediate safety risks, they can significantly impact your driving comfort, especially on long trips. Ignoring these symptoms can lead to increased driver fatigue and inconvenience. However, if the malfunction is linked to more serious problems, such as engine issues or a check engine light, the urgency escalates. These underlying problems could lead to further mechanical damage if not addressed promptly. Therefore, it is essential to diagnose the issue as soon as possible. By doing so, you not only enhance your driving experience but also prevent potential safety hazards and costly repairs down the line. Taking the time to troubleshoot and resolve cruise control malfunctions can ensure a smoother, safer ride in your Honda Odyssey.

You’ve got options with RepairPal

Whether you need a more accurate auto repair estimate or help finding a reputable shop in your area, we’ve got you covered.