The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.
When the head gasket begins to fail, the engine may have no symptoms at all. They only begin to occur when the leak has reached an engine oil passage, engine coolant passage or the engine cylinder.
When that happens, the engine may be very difficult to start, and run roughly when idling. There may be oil or coolant leaking, and the engine may begin to overheat, or at least run hot. At this point, there may be coolant in the engine oil pan — this will look creamy and lighter in color than the oil. Also, the radiator or engine coolant reservoir may have a gurgling sound, the presence engine oil, or smell of combustion. And the check engine light will come on.
The coolant being burned in the engine will produce white exhaust that smells sweet, like engine coolant. When the head gasket fails completely, the engine will overheat within minutes of starting, will stall and then won't restart.
A failing heater core may cause the car's interior to smell like engine coolant. The smell will become worse when the heater is turned on. The engine may also begin to run hotter until the vehicle is repaired.
The worst-case scenario is the engine overheating, which can cause extensive engine damage.
If the heater core is clogged, the air that blows when the heater is turned on will not be very hot.
Problems with the intake manifold gasket can create the following symptoms:
» LEARN MORE: Intake manifold gasket symptoms
A failing radiator can cause the engine to run hot or overheat. Most radiators are made of metal and plastic. The plastic parts can become brittle and crack over time, causing a leak of coolant (typically green or pink in color). All manufacturers have a recommended service interval for coolant renewal. As the coolant ages, the additives breakdown and being to form solid deposits. These deposits will build up in the passages of the cooling system and will eventually clog components, including the radiator. A leaking or clogged radiator must be replaced. Some automatic transmission cars will also have a transmission cooler integrated into the radiator. Lines going to and from the transmission circulate transmission fluid to help cool the transmission in heavy duty applications such as towing or off-roading. If this integrated cooler fails, it can allow transmission fluid and coolant to mix. This will causing shifting issues in addition to overheating.
A coolant leak may be noted from the hoses. Coolant hoses can be damaged by oil leaks, or age. This will lead to swelling or cracking, it is suggested to replace the hoses before they begin leaking to avoid potential overheating.
The bad thermostat can cause two different sets of problems, depending on whether it's stuck open or stuck closed.
A thermostat that is stuck open can cause the engine to run colder than normal and turn on the check engine light. It may also cause poor fuel mileage and the heater to blow cool air.
A thermostat that is stuck closed will cause the vehicle to overheat. If a new thermostat doesn't resolve engine temperature problems, the cooling system needs to be checked for other issues.
» LEARN MORE: Signs of a bad thermostat, and how to fix it
If a vehicle is overheating, a bad thermostat could be the problem, and a damaged thermostat housing is more likely to produce a coolant leak, either from a cracked or warped housing or a failed seal to the engine. The thermostat housing can be made of metal or plastic. And the housing can be a stand-alone part that is separate from the thermostat, or (on later model vehicles) can be integrated with the thermostat and replaced as a single unit.
The two most common signs of a bad pump are leaks and noises.
Leaking water pumps can result in damage to the drive and timing belts, and cause the engine to overheat. A failed water pump can be caused by other problems in the cooling system, such as a bad thermostat, radiator or head gasket.
When tackling a coolant leak in your 2017 Honda Fit, start by visually inspecting the area under the vehicle and the engine bay for any signs of coolant pooling or staining. This initial check can often reveal obvious leaks from hoses or the radiator. Next, examine the radiator, hoses, and water pump for any visible damage or corrosion, as these are common culprits. If the leak isn't immediately apparent, using a pressure tester can help you pressurize the cooling system, allowing you to pinpoint the exact location of the leak. Additionally, be alert for white smoke from the exhaust, which may indicate coolant entering the combustion chamber. Once you've identified the source, proceed with the appropriate fix: replace any damaged hoses, consider using a radiator sealant for minor leaks, or replace the radiator or water pump if necessary. After making repairs, ensure all connections are secure and refill the cooling system with the correct coolant mixture, taking care to bleed out any air pockets to maintain optimal performance. By following this methodical approach, you can effectively diagnose and resolve coolant leaks, ensuring your Honda Fit runs smoothly.
When dealing with coolant leaks in a 2017 Honda Fit, it's essential to understand the common culprits that may be at play. One frequent issue is a damaged radiator, which can develop cracks or corrosion over time, leading to coolant escaping. Additionally, a faulty radiator cap can disrupt the pressure balance within the cooling system, resulting in leaks. Worn-out hoses are another common source, as they can crack or become brittle with age, allowing coolant to seep out. The water pump, responsible for circulating coolant, can also fail and leak, creating a mess in the engine bay. In more severe cases, a cracked engine block may be the source of the problem, which requires immediate attention. Lastly, loose or damaged hose clamps can prevent a proper seal, causing coolant to leak from the connections. Identifying these issues early on is crucial to prevent overheating and potential engine damage, making it advisable for DIYers to regularly inspect their vehicle's cooling system.
Addressing a coolant leak in a 2017 Honda Fit is of utmost importance due to the critical role coolant plays in maintaining engine temperature. A leak can lead to overheating, which not only risks severe engine damage but can also result in costly repairs if left unattended. The engine's performance relies heavily on the cooling system, and a loss of coolant can diminish its ability to regulate temperature effectively. Furthermore, a coolant leak may indicate underlying issues such as a damaged radiator or a failing water pump, which could exacerbate the problem if not resolved quickly. Ignoring these symptoms can lead to a cascade of failures, ultimately compromising the vehicle's safety and reliability. Therefore, it is essential to address any signs of a coolant leak immediately to ensure the longevity and performance of your Honda Fit.
Not sure what's wrong?
Get help from a trusted expert
Read about related problems experienced by other Honda Fit drivers like you.
See what others are asking about their Honda Fit. Get answers from RepairPal's community of auto experts and enthusiasts.