Instrument cluster gauges, panel lamps, and electric door locks may not operate, and the courtesy lamps may remain on. These faults are commonly caused by "logic lock-up" of the body control module (BCM). If this is the case the BCM should be replaced with a revised version.
Various Electrical Issues Due to Internal Body Control Module Failure on Chrysler New Yorker
Average mileage: 114,500 (100,000–129,000)
4 people reported this problem
2 people shared problem details
My Problem Started in when a Short was found in Vanity Mirrors & Dimmer Turn Signal Switch. Replaced Battery & Dimmerswitch. ABS Trouble Light came on. Now Transmission would not shift out of second gear. But now have several Electrical Issues. Checked all fuses & Relays. Alternator & Battery. All Good. No Poewer to Lights, Power Door Locks & Windows. Radio A/C Controls Radiator Cooling Fans. It seems to be ok after removing Battery Cables to reset BCM. But a Surge or Failure is exploding Bulbs for #3 Brake Light. These Bulbs Blow & all kinds of Problems Start. Car Has New Battery, Alternator & Belt, Dimmer & Head Light switch & Relay for Transmission. I am Checking all Connection for Ground & Contact not corroded or Damage. Has 157000 miles now & has been a Reoccuring Problem. Security System seems to be the weak link. Reset it by cycling key 3 times in left & or Right door. Seems to reset system. Do this everytime Loss of Power or any repair to Vehicle.
1995 Chrysler New Yorker129,000Visitor
All instrument s failed
I need to know the location of the body control module on a 1996 chrysler new yorker?
Vehicles may develop a start and die out condition or a transmission that defaults to second ge...
Electronic dash is out. Radio lights out. Computer indicator out. Dome lights out. Fuses se...
Just about once a day, my transmission will stick in second gear (fail safe mode) and will not...
A dirty throttle body may cause low engine idle speed or frequent stalling, as oily residue bl...