X

2008 Toyota Sequoia Recalls

Electrical & Lights,November 19, 2014
RepairPal Expert Overview:

Southeast Toyota is recalling certain vehicles because the seat heater element may become damaged as a result of compression of the seat cushion. The damaged element could short causing burning of the seat cushion, increasing the risk of personal injury. Dealers will disconnect seat heaters with copper strand elements and refund the purchase price of the seat heater accessory to correct this concern.

Electrical & Lights,October 10, 2012
RepairPal Expert Overview:

Toyota and General Motors are recalling certain models because the power window master switch assembly in some of these vehicles was built using a less precise process for lubricating the internal components of the switch assembly. Irregularities in this lubrication process may cause the power window master switch assemblies to malfunction and overheat. This could result in the switch melting or possibly catching fire. Dealers will inspect and repair or replace the master window switch as necessary.

Suspension & Steering,March 4, 2011
RepairPal Expert Overview:

Due to a calibration error, the tire pressure monitoring system warning light may not illuminate to warn of incorrect tire pressure. Driving with the incorrect tire pressure can result in tire failure, increasing the risk of a crash. Dealers will re-initialize the tire pressure monitoring system to restore proper operation. Toyota has not provided a notification schedule at this time.

Body, Interior & Misc.,May 27, 2010
RepairPal Expert Overview:

These vehicle were sold without the required load carrying captivity modification label. Dealers will mail the corrected label to vehicle owners. Owners have the option of requesting that the dealer install the label. This recall is expected to begin on May 27, 2010.

Body, Interior & Misc.,May 27, 2010
RepairPal Expert Overview:

Southeast Toyota is recalling 2005–2011 models for failing to comply with federal safety standards on tire selection and rims. Affected models were sold without the proper load-carrying capacity modification labels, which may cause the driver to overload the vehicle, increasing the chance of a crash. Dealers will mail the correct labels to the customer or install the label free of charge.

Body, Interior & Misc.,February 5, 2010
RepairPal Expert Overview:

Toyota is recalling 2005–2010 Avalon; 2007–2010 Camry, 2009–2010 Corolla, Corolla Matrix, and Rav4; 2010 Highlander; 2008–2010 Sequoia; and 2007–2010 Tundra models because the sliding surface of the friction lever may become smooth during operation, which can cause condensation. This may cause the accelerator pedal to become harder to depress, slower to return, or to become stuck in a partially depressed position, which can increase the risk of a crash. Dealers will install a reinforcement bar in the accelerator pedal so it will operate smoothly.