The steering column assembly contains electrical connections for the driver's airbag, commonly called the "clock spring". This spiral cable assembly includes a Flexible Flat Cable (FFC). Due to the shape and location of the FFC's retainer, the FFC could become damaged when the steering wheel is turned. If the FFC is damaged, the driver's airbag could be deactivated. The failure of the driver's airbag to deploy when required increases the risk of injury to the driver. When the parts are available, dealers will replace the spiral cable assembly to correct this concern.
2006 Toyota RAV4 Recalls
If the nuts for adjusting the rear wheel alignment are improperly tightened during service, the rear tire rod may develop unwanted movement and rust, leading to thread damage and eventual failure. Failure of the rear tie rod could cause a loss of vehicle control, increasing the risk of a crash. Dealers will inspect the tie rods and replace any that have rust or corrosion on the alignment adjustment threads. All rear tie rods will then be encased in an epoxy to prevent future environmental damage.
Toyota is recalling certain model year 2006 through 2011 RAV4 and 2010 Lexus HS250h passenger vehicles. If nuts securing the rear tie rod are not tightened properly during service, unwanted movement and rust can develop leading to component failure. Failure of the rear tire rod will cause an abrupt change in the vehicle's alignment. This could lead to a loss of vehicle control, increasing the risk of a crash. As of this writing, remedy information is not available for this recall.
The accelerator pedal can become trapped under an unsecured or incompatible floor mat. This can cause the accelerator pedal to stick in the wide open position, increasing the risk of a crash. At this time, the remedy plan is still under development, but will most likely involve modification or replacement of the accelerator pedal and Toyota all-weather floor mats. No schedule of owner notification is available at this time. The Toyota recall number is 90L; the Lexus number is 90LG.
These vehicle were sold without the required load carrying captivity modification label. Dealers will mail the corrected label to vehicle owners. Owners have the option of requesting that the dealer install the label. This recall is expected to begin on May 27, 2010.
Southeast Toyota is recalling 2005–2011 models for failing to comply with federal safety standards on tire selection and rims. Affected models were sold without the proper load-carrying capacity modification labels, which may cause the driver to overload the vehicle, increasing the chance of a crash. Dealers will mail the correct labels to the customer or install the label free of charge.
The load carrying capacity modification label may be missing from the vehicle. This information provides maximum load carrying weights as well as information about required tires and wheels. If not present, an inappropriate load may be carried in the vehicle, increasing a safety risk. Toyota has supplied customers with a new label to affix to the vehicle. This recall began on August 18, 2009.