2004 Toyota Avalon Recalls

(RepairPal Expert Overview)

The airbag control module can fail prematurely due to electrical noise beyond the tolerance it was designed for. As a result the front airbags, side airbags, and/or seatbelt pretensioners could deploy inadvertently while the vehicle is being operated, increasing the risk of personal injury and/or a crash. Dealers will replace the airbag control module and front and/or side impact sensors as required to correct this concern.

(RepairPal Expert Overview)

Circuits in the supplemental restraint system may short, resulting in damage that may unintentionally deploy the front air bags and / or seat belt pretensioners. Dealers will install a noise filter between the air bag control module and the affected wiring harness free of charge to resolve the concern.

(RepairPal Expert Overview)

The amount of adhesive applied between the inner and outer parts of the crankshaft pulley may be inadequate. If this is the case, the outer ring may become misaligned and/or not properly rotate with the inner ring, causing an abnormal noise and/or illumination of the Check Engine Light. In some cases, the power steering belt could come off resulting in a loss of power steering assist, increasing the risk of a crash. Dealers will inspect the crankshaft pulley and replace it if necessary.

(RepairPal Expert Overview)

Toyota is recalling 2000–2004 Avalon models due to improper casting of the steering lock bar, which may cause the bar to crack or even break. If the bar breaks, the steering wheel will lock, causing the driver to lose control of the vehicle, increasing the risk of a crash. Dealers will replace the steering lock device free of charge.