2010 Subaru Forester Recalls
In certain states, where salt is used to de-ice the roads, corrosion can occur at the four-way joint connector of the hydraulic braking system leading to a brake fluid leak. This fluid loss can result in longer than expected stopping distance, increasing the risk of a crash. Dealers will apply an anti-corrosion wax to the four-way joint connector area to correct this concern. Some vehicles previously recalled of this concern may not have been repaired correctly. In addition, owners of vehicles outside of the affected states may request this recall be performed. Please contact your dealer to determine exactly how this recall affects your vehicle.
Brake lines may corrode excessively when salt water splashes behind a gap in the fuel tank protector. This can lead to brake line failure and leakage, and cause the brakes to fail. Dealers will inspect for leaking lines, apply rust proofing wax and replace lines found to be leaking free of charge to resolve the concern.
The accessory lights that illuminate the area under the doors are referred to as "puddle" lights. An electrical short circuit can develop when either the puddle light or its connector are exposed to an electrolytic moisture source (such as road spray that has road salt in it) and it penetrates the circuit board of the puddle light or the pins of the puddle light connector(s). The short circuit can generate heat which may melt the plastic resulting in smoke or fire. Subaru dealers will install an additional fused-harness, to protect the puddle light system.
The automatic locking retractor, in the seat belt assembly located at the rear center seating position, may not lock as expected when used with a child safety seat. In the event of a crash, this would increase the risk of injury to a child seated at that location. Dealers will replace the affected seat belt retractor assembly to correct this concern. The Subaru recall number is WQA-37.