6
questions

I have fitted a different pump and the lights still remains on. Can anyone recommend anything that would sort this problem out for me please

This is off to the left and 2 small rivets and a large rivet on the bottom which needs to be tightened. Oil is leaking from this> If this is tightened, will this solve my problem? Just started yesterday (6-11-14). Thanks. Diane

car runs totally perfecthas 97000.how do i find this smal leak? and get ur done. need a smog check.only so many parts ,charcoal canister,purge valve,leak detect conrol,

How much should it cost me for labor and parts to replace 2 serpentine belts (air conditioner AND power steering, etc. belts). Also need to replace ac belt tension pulley, as well as on the power steering ,etc. belt the idler pulley and tension pulley (cover and wheel).

Will go in and lock if I turn key to start engine, but will not go back to off position. Stays in position 2 in auxillary. Could it be the tumbler housing? Will not lock in by pushing straight in and then turning to off. I actually think my original ignition tumbler was OK.
Perplexed in Idaho

I Have two 12 inch cuts in my convertible top and I would like to have the top replaced inexpensively or purchase an inexpensive convertible hard top.