Close

2007 Mitsubishi Outlander Recalls

RepairPal provides easy-to-read analysis of 6 official 2007 Mitsubishi Outlander recalls. Find out if your 2007 Mitsubishi Outlander needs service due to a recalled defect and learn how to fix it.

RepairPal Expert Overview on October 31, 2016

Moisture can cause corrosion to build up on the wiper link mechanism, possibly causing the link to separate. This would cause the wipers to fail, resulting in reduced visibility for the driver which can cause an accident.

Recall repairs on your Mitsubishi must be performed by a Mitsubishi dealership. Mitsubishi will notify known owners of affected vehicles (a timetable for this notification is not available as of the time of this writing). If you do not receive a notification, but wish to check to see if your vehicle is included, please contact one of your local Mitsubishi dealerships. They will also check for any other incomplete recalls on your vehicle. For best results, be prepared to provide your Vehicle Identification Number (VIN) to the service department consultant you speak with.

RepairPal Expert Overview on June 23, 2016

The front suspension lower control arms may corrode excessively in areas where there is a higher concentration of salt water exposure, such as from use of road salt. This could cause the arms to separate from the vehicle frame, resulting in loss of vehicle control.

Recalls on your Mitsubishi must be performed by a Mitsubishi dealership. Mitsubishi will notify known owners of affected vehicles (a timetable of this notification is unavailable as of the time of this writing). If you do receive a notification, but wish to check to see if your vehicle is included, please contact one of your local Mitsubishi dealerships. They will also check for any other uncompleted recalls on your vehicle. For best results, be prepared to provide your Vehicle Identification Number (VIN) to the service department consultant you speak with.

RepairPal Expert Overview on September 12, 2014

The brake light switch can fail, resulting in the brake lights not working when brakes are applied.

Mitsubishi began notifying owners of affected vehicles in October 2014. You can check with your dealer to see if your vehicle is involved in this program. It is helpful to have your VIN (Vehicle Identification Number) on hand when you contact them. The Mitsubishi recall number is SR-14-010.

RepairPal Expert Overview on June 25, 2014

The power steering pressure hose may develop a leak from contacting the transmission housing. A leak may lead to loss of steering assistance.

Mitsubishi notified owners of affected vehicles starting in August 2014. You can check with your dealer to see if your vehicle is involved in this program. It is helpful to have your VIN (Vehicle Identification Number) on hand when you contact them. The Mitsubishi recall number is SR-14-006.

RepairPal Expert Overview on February 24, 2009

There is a switch mounted at the brake pedal which turns the brake lamps on and off when the brake pedal is depressed and released. In some cases, this switch may malfunction and prevent the brake lamps from illuminating. If the brake lamps do not light up, an accident could occur as other drivers will not be able to see that you are stopping.

We at RepairPal have designated this a high priority recall; the brake lamps may not be illuminating. Please contact your Mitsubishi dealer. They will check to see if your specific vehicle is affected and advise you on what to do next. Always have your vehicle identification number (VIN) handy when you call.

RepairPal Expert Overview on February 28, 2008

The wiring connector that exists for power seats but lies unused under a manual seat may corrode from moisture and contaminants and overheat, causing it to melt and become a fire hazard.

Mitsubishi notified owners of affected vehicles starting in April 2008. You can check with your dealer to see if your vehicle is involved in this program. It is helpful to have your VIN (Vehicle Identification Number) on hand when you contact them.