1995 Mercury Sable Recalls
VEHICLE DESCRIPTION: TAURUS/SABLE VEHICLES EQUIPPED WITH 3.0L AND 3.8L ENGINES AND MUSTANG VEHICLES WITH 3.8L AND 5.0L ENGINES. IT IS POSSIBLE FOR THE ENGINE COOLING FAN BEARING TO SEIZE.
THIS IS NOT A SAFETY RECALL IN ACCORDANCE WITH THE SAFETY ACT. HOWEVER, IT IS DEEMED A SAFETY IMPROVEMENT CAMPAIGN BY THE AGENCY. VEHICLE DESCRIPTION: 1995 TAURUS/SABLE PASSENGER VEHICLES EQUIPPED WITH 3.0L AND 3.8L ENGINES AND 1995 FORD MUSTANG VEHICLES WITH 3.8L AND 5.0L ENGINES. IT IS POSSIBLE FOR THE ENGINE COOLING FAN BEARING TO SEIZE.
Ford has recalled certain 1986-1995 Taurus and Mercury Sable models and 1988-1994 Lincoln Continental models in high corrosion, cold weather states because the rear subframe mount plate nuts may corrode and fail, causing the subframe to drop. If the subframe drops, loss of vehicle control and functionality can occur. Dealers will install subframe rear mount bolts, reinforcement plates, and plate nuts.
Ford has recalled certain 1991-1995 Taurus and Mercury Sable models equipped with the 3.8L V6 and 1991-1994 Continental models for an issue with the speed control cable. In cold weather states, the speed control cable could freeze. This could cause the accelerator cable to stick. To deter moisture and ice build-up, dealers will add a rubber boot to the speed control cable.
Ford has recalled certain 1992-1995 Taurus and Mercury Sable models with 3.8L engines, 1994-1995 Taurus and Mercury Sable models with 3.0L engines, 1992-1994 Tempo and Mercury Topaz models with 3.0L engines, 1994 Tempo and Mercury Topaz models with 2.3L engines, and 1992-1994 Lincoln Continental models in certain cold weather states for an issue with the engine electric cooling fan. During high winds, low temperatures, and drifting snow, the fan could become blocked or frozen with snow. This could cause the fan not to rotate and ultimately overheat. Dealers will install a harness with a circuit breaker to protect the fan motor from overheating.
Ford has recalled certain 1995 Taurus and Mercury Sable vehicles for an issue with a missing or misplaced clip that secures the brake pedal arm to the master cylinder push rod. If this clip is missing or damaged, the push rod could separate from the pedal arm, causing a lack of braking power. Dealers will inspect and install a retainer clip if necessary.