Land Rover Range Rover Recalls

RepairPal Expert Overview:

These vehicles are being recalled because their front brake lines (hoses) may rupture causing loss of brake fluid and braking control. Loss of front braking in a vehicle reduces the ability to stop suddenly, increasing the risk of a crash. Dealers will inspect the front brake lines and replace both as necessary.

RepairPal Expert Overview:

Thirty-six vehicles are being recalled because during the manufacturing process, the windshield on these vehicles may have been installed incorrectly. In the event of a crash, the windshield may come loose from the vehicle, increasing the risk of injury to the vehicle's occupants. Dealers will replace the windshield on these vehicles to correct this concern. The Land Rover recall number is P028.

RepairPal Expert Overview:

The air bag warning light may illuminate and the passenger front air bag may not deploy as expected. Failure of the front air bag to deploy in the event of a crash increases the risk of injury. Dealers will update the software in the air bag control module to correct this issue. This recall is scheduled to begin by December 21, 2009. The Land Rover recall number is P020.

RepairPal Expert Overview:

The front differential coupling sleeve and the propeller shaft may be misaligned, resulting in spline wear over time. As this wear progresses, abnormal noise and/or vibration may develop. Continued vehicle operation can eventually result in the splines shearing and loss of drive force to the wheels, increasing the risk of a crash. Dealers will install a revised design of the propeller shaft, flange kit, and heat shield kit to correct this concern. This recall is expected to begin on January 6, 2009 The Land Rover recall number is P041.

RepairPal Expert Overview:

Certain vehicles may have been assembled with an incorrectly manufactured automatic transmission parking pawl guide plate. As a result, the transmission may not engage in park when the shifter is placed in the park position. The vehicle may roll unexpectedly if the parking brake is not engaged. Unexpected rolling of the vehicle could result in a crash. Dealers will replace the parking pawl guide plate to correct this concern. The Land Rover recall number is B023.

RepairPal Expert Overview:

The brakes may unexpectedly apply due to a failure internal to the yaw rate sensor. Dealers will inspect and if necessary replace the sensor free of charge to correct the problem.

Summary:
VEHICLE DESCRIPTION: CERTAIN SPORT UTILITY VEHICLES FAIL TO COMPLY WITH THE REQUIREMENTS OF FMVSS NO. 114, "THEFT PROTECTION." WATER CONTAMINATION OF THE AUTOMATIC TRANSMISSION OIL CAN LEAD TO VARIOUS FAILURE MODES OF THE TRANSMISSION. ONE OF THESE FAILURE MODELS RESULTS IN INCORRECT OPERATION OF THE PARK LOCK FUNCTION THAT COULD ALLOW A VEHICLE TO ROLL AWAY IF PARKED WITHOUT THE HANDBRAKE PROPERLY SET.
Summary:
VEHICLE DESCRIPTION: SPORT UTILITY VEHICLES. COOLANT SYSTEM LEAKS HAVE BEEN IDENTIFIED IN AREAS WHERE THE COOLANT COULD BE SUBJECTED TO ELEVATED TEMPERATURES.
Summary:
VEHICLE DESCRIPTION: SPORT UTILITY VEHICLES. THE CAST ALLOY THROTTLE BODY IS HEATED BY FLUID BLED FROM THE COOLING SYSTEM, TO PREVENT ICING IN EXTREMELY COLD WEATHER CONDITIONS. THIS FLUID PASSES THROUGH A SMALL ATTACHMENT (PLATE) TO THE THROTTLE BODY, WHICH UTILIZES A CORK GASKET. THE CORK GASKET HAS PROVEN TO BE UNRELIABLE IN THIS APPLICATION. CONSEQUENTLY, COOLANT FLUID CAN LEAK FROM THE INTERFACE BETWEEN THE DE-ICER PLATE AND THE THROTTLE BODY.
Summary:
VEHICLE DESCRIPTION: SPORT UTILITY VEHICLES. THE LOADING CONDITIONS ON THE VEHICLE'S LEFT SIDE ENGINE IDLER PULLEY CAN EXCEED THE MAXIMUM CALCULATED FIGURE OF THE ORIGINAL DESIGN SPECIFICATION. THE MATERIAL OF THE PULLEY CAN FRACTURE AND ULTIMATELY FAIL. FAILURE OF THE PULLEY MATERIAL CAN CAUSE THE PULLEY TO THROW OFF THE SERPENTINE BELT.

Related Content