X

Jeep Patriot Recalls

Models : Jeep Compass, Jeep Patriot
Body, Interior & Misc., June 4, 2013
RepairPal Expert Overview:

The airbag system contains various components which deploy to help protect vehicle occupants if a crash occurs. These vehicles are being recalled because the seatbelt pre-tensioners and/or side airbags may be slow to deploy when needed. Delayed deployment will increase the risk of personal injury. Dealers will update the airbag system software to correct this concern.

Models : Jeep Compass, Jeep Patriot
Engine, April 3, 2013
RepairPal Expert Overview:

On these vehicles, the fuel tank is divided into two sections. A system using a transfer tube is used to move fuel from the secondary side to the primary side where the fuel pump is located. This transfer tube may have been improperly manufactured causing the transfer of fuel to be interrupted. If this condition causes the primary side of the fuel tank to run dry the engine will stall, increasing the risk of a crash. Dealers will replace the fuel tank transfer tube in affected vehicles to correct this concern.

Models : Jeep Compass, Jeep Patriot
Exhaust & Emissions, April 2, 2012
RepairPal Expert Overview:

Some vehicles may have been assembled with a fuel tank assembly containing a damaged roll-over valve. In the event of an impact or roll-over type crash, fuel leakage could occur, increasing the risk of a fire. Dealers will replace the fuel tank to correct this concern. The Chrysler recall number is M11.

RepairPal Expert Overview:

Some vehicles may have been assembled with a missing or incorrectly installed steering column pivot rivet. This could result in a loss of steering capability, increasing the risk of a crash. Dealers will inspect the rivet and repair the steering column as required. This recall is expected to begin during June 2011. The Chrysler recall number is L23.

 

RepairPal Expert Overview:

Chrysler is recalling 2009 Sebring, Dodge Caliber, Avenger, Journey, Jeep Patriot, and Compass models due to a new adhesive in the PCM manufacturing process that can cause the printed circuit board to break. This may cause the engine to stall and cause a crash without warning. Dealers will replace the PCM free of charge.