In areas where winter road salt is used, a mixture of snow/water and salt may enter an assembly location hole in the upper strut housing. This corrosive mixture can collect on the mating surface of the strut housing panel and the inner hood ledge assembly; over time, this can cause rusting of the strut tower housing. The rust can weaken the housing, causing it to crack and pull away from the inner hood ledge assembly. This can lead to grinding noises and increased steering effort, which, if severe enough, can cause the steering column to break. This would result in a loss of steering control, increasing the risk of a crash. Dealers will inspect the strut housing and repair the vehicles as necessary. An interim notification letter should be mailed to owners prior to May 16, 2011.
2000 Infiniti QX4 Recalls
Rust May Form on the Strut Tower Housing
Suspension & Steering,April 20, 2011
RepairPal Expert Overview:
Nissan Pathfinder Recall 07V435000
Engine,November 26, 2007
Summary:ON CERTAIN VEHICLES ORIGINALLY SOLD IN OR CURRENTLY REGISTERED IN THE STATES OF CONNECTICUT, DELAWARE, IOWA, ILLINOIS, INDIANA, KENTUCKY, MASSACHUSETTS, MAINE, MARYLAND, MICHIGAN, MINNESOTA, NEW HAMPSHIRE, NEW JERSEY, NEW YORK, OHIO, PENNSYLVANIA, RHODE ISLAND, TENNESSEE, VERMONT, VIRGINIA, WEST VIRGINIA , WISCONSIN AND THE DISTRICT OF COLUMBIA, DURING THE COATING PROCESS OF THE FUEL FILLER TUBE ASSEMBLY, AN INSUFFICIENT AMOUNT OF COATING MAY HAVE BEEN APPLIED AT THE LOWER MOUNTING BRACKET. THIS COULD RESULT IN AN OPENING IN THE COATING WHICH CAN ALLOW WATER TO ENTER AND MAKE CONTACT WITH THE BARE METAL OF THE TUBE.
Infiniti QX4 Recall 00V410000
Electrical & Lights,December 22, 2000
Summary:VEHICLE DESCRIPTION: PASSENGER VEHICLES. THESE VEHICLES MAY HAVE AN IGNITION LOCK ASSEMBLY WITH IMPROPERLY SEATED KEY CYLINDER CAP CONNECTOR PINS. VIBRATION CAN CAUSE THE CONNECTING PINS TO LOOSEN AND/OR FALL OUT ALLOWING THE KEY CYLINDER CAP TO DISENGAGE FROM THE KEY CYLINDER.