2010 Honda Accord Recalls
Certain driving styles can result in a broken outer race of the secondary shaft bearing inside the automatic transmission. A broken outer race may cause abnormal noise, the Check Engine Light to turn on, and contact between the transmission idle gear and an electronic sensor housing to occur. This could result in a short circuit, causing the engine to stall. Also, pieces of the outer race or ball bearing may become lodged in the parking pawl, resulting in the vehicle rolling after the driver has placed the shifter in the Park position. Dealers will update the transmission control module software to correct this concern. The Honda recall number is R89.
A connection issue may develop in the engine wire harness, which can lead to the intermittent loss of ignition spark and cause the vehicle to stall. Dealers will replace the affected electrical connector to correct this issue. This recall is scheduled to begin in February of 2011.
Bolts that attach the front left and right damper bracket to the front suspension may have been left loose, along with spindle nuts on Pilot and Accord V6 vehicles. This can result in noise, or loss of vehicle steering. Dealers will inspect and replace any loose front damper bracket bolts or spindle nuts as needed free of charge to resolve the concern.
Honda is recalling aftermarket full nose masks, part numbers 08P35-TA0-100 and 08P35-TA6-100, specifically designed for 2008–2010 Accord models. The nose mask material may interfere with the hood latch mechanism, which may cause the hood to pop open while the vehicle is in motion. Honda asks owners to remove the mask immediately and see a dealer about getting it replaced free of charge.