2011 GMC Yukon XL 1500 Recalls
The ignition switch actuator can bind causing the ignition switch to stick in the "start" position. If this were to occur the actuator can unexpectedly release, cause the ignition switch to snap back into the "Accessory" position. This would cause the engine to turn off with an associated loss of brake and steering power assist. If these conditions were to lead to a crash the airbags may not deploy as expected. Dealers will inspect and replace the ignition lock housing as necessary to correct this concern.
The intermediate steering shaft attaching bolts may not have been tightened to the proper specification. This could allow the steering shaft to separate. The driver could experience a loss of steering ability, increasing the risk of a crash. Dealers will inspect and ensure the intermediate steering shaft bolts are tightened to the proper specification. This recall is expected to begin on July 13, 2011. The General Motors recall number is 11191.
The rear axle cross pin may break. The cross pin is an internal component of the rear differential, which is housed in the rear axle assembly. If the cross pin breaks, the rear axle may lock, which could result in loss of control and a crash. Dealers will install a new rear axle cross pin to correct this concern. This recall should begin no later than January 25, 2011. The General Motors number for this recall is 10426A.