2013 GMC Savana 1500 Recalls
Certain vehicles equipped to run on compressed natural gas are being recalled because the high pressure natural gas regulator could develop a leak, increasing the risk of a fire or explosion. Dealers will replace the natural gas regulator to correct this concern.
Certain vehicles are being recalled because if a crash were to occur not requiring deployment of the front airbags, the head of an unbelted front seat passenger could hit the instrument panel, resulting in personal injury because the panel may not sufficiently absorb the impact. As of this writing, General Motors is still working on a remedy for this concern.
The label that indicates "CNG Fuel Only" is too small. Owners of affected vehicles will receive replacement labels from General Motors, and dealers can help with installation, free of charge to resolve the concern.
Chevrolet Express and GMC Savana vans are used by the Explorer Van Company as the base vehicle for some of their van conversions. Certain Explorer vans are being recalled because the wiring under the power seats may not have been properly secured during vehicle conversion. The wires can be damaged by the seat mechanism resulting in an electrical short and possibly a fire. Dealers will inspect and replace any seat wire harness found to be damaged. If the harness is not damaged, it will be secured to prevent future damage.
Under regular conditions you should not be able to remove your key from the ignition cylinder while your car is on and/or your transmission is not in the Park position. This may occur due to a manufacturing defect in your vehicle's ignition lock cylinder. Removing the key while the vehicle is still running and/or in Park may allow your vehicle to roll away causing an accident. To correct this condition GM will replace the ignition lock cylinder and 2 provide 2 new keys. The GM recall # is 12332.
All late model vehicles are equipped with a "Shift interlock" system that prevents vehicles with and automatic transmission from being shifted out of the Park position under certain conditions. Some of these vehicles are being recalled because they may have been assembled with a broken park lock cable or a malformed steering column lock actuator gear. Failure of these components can allow the shifter to be moved out of the Park position with the ignition key removed or in the off position. This can cause the vehicle to roll away unexpectedly increasing the risk of injury or a crash. Dealers will inspect the recalled vehicles and replace the steering column as necessary.