2007 Ford Crown Victoria Recalls
Certain vehicles are being recalled because the upper intermediate steering shaft could separate resulting in loss of steering control. This recall includes models previously recalled under campaign #13V-385, these vehicles may have been incorrectly repaired. Dealers will inspect and replace the upper immediate shaft if necessary. If the steering column lower bearing has separated, a retainer clip will be installed.
The intermediate shafts connect the steering column to the steering gear. Vehicles in areas where salt is used to de-ice the roads are being recalled because severe corrosion can damage the lower intermediate steering shaft. This can cause the upper intermediate shaft to collapse and separate at the lower steering column bearing. Separation will result in complete loss of steering ability. Dealers will replace the lower intermediate steering shaft and inspect the upper intermediate shaft and steering column lower bearing for damage, they will be repaired or replaced as necessary. If the steering column lower bearing has separated, a retainer clip will be installed.
Additionally, Vehicle owners located where salt is not used who have concerns regarding their steering will have a one-time option to have their vehicles inspected and, if necessary, repaired.
The front and rear right side brake lines may have been reversed at the ABS hydraulic control unit during vehicle assembly. The brakes may not function as intended, which could cause a crash. Dealers will inspect the ABS hydraulic control unit and brake line connections, and reposition them as needed. The recall began April 27, 2007. The Ford recall number is 07C16.
The windshield may not be properly installed, which may cause wind noise, squeaks/rattles, and/or water leaks. If the windshield comes loose in a crash, vehicle occupants may be less protected. Dealers will replace the windshield free of charge. The recall began November 22, 2006. The Ford recall number is 06C15.