» » »

Car Recalls

Recalls are issued for cars with safety-related defects or problems

2004 Dodge Ram 3500 recalls

 

Suspension & Steering, November 6, 2013

RepairPal Expert Overview:

The left and right tie rod assemblies are part of the front steering linkage, Certain trucks are being recalled because the left tie rod can break unexpectedly. This can result in loss of steering control. Dealers will inspect the steering linkage and install a new left tie rod assembly as necessary to correct this concern. This recall supersedes a previous recall, some vehicles repaired under the first recall may require an additional repair.

Learn more »

Suspension & Steering, July 6, 2011

RepairPal Expert Overview:

Certain vehicles may have been assembled with a left outer tie rod ball stud that may fracture; others may have received the affected tie rod assembly as a replacement part during normal service. This condition tends to occur during low speed parking lot type maneuvers when the driver is making a tight turn. This condition could result in a loss of directional stability in the left front wheel, increasing the risk of a crash. Dealers will inspect the tie rod ends, replace the left outer tie rod end as required, and perform a front end toe alignment as needed. The manufacturer has not yet provided an owner notification schedule. The Chrysler recall number is L16.

Learn more »

Body, Interior & Misc., August 28, 2009

RepairPal Expert Overview:

Chrysler has recalled certain 2002-2009 Dodge Rams (1500/2500/3500) because the wiper module assemblies may be susceptible to water intrusion, which may result in partial or complete loss of windshield wiper capability. This may cause reduced visibility for the driver, which could result in a crash. Dealers will replace the wiper module assemblies with vented wiper motor housings.

Learn more »

Suspension & Steering, June 6, 2009

RepairPal Expert Overview:

Chrysler is recalling 18,000 aftermarket steering linkages used for service on 2003–2008 Dodge Ram Heavy Duty Pickup models. The affected assembly part numbers are 52122362AA through 52122362AD. The linkages may drag or fracture, causing a loss of steering control, which can increase the risk of a crash. Dealers will replace the steering linkage drag link inner tie rod end assembly and inspect the steering linkage damper bracket free of charge.

Learn more »

Drive Train, March 20, 2006

RepairPal Expert Overview:

On trucks with diesel engines, when attempting to quickly exit the vehicle with the engine running, the driver may accidentally leave the automatic transmission in reverse. This could allow rearward movement of the vehicle. Dealers will perform a software modification to equip these vehicles with an out-of-park alarm. This is not a recall, but is a safety campaign and the work should be covered free of charge. The Chrysler campaign number is E17.

Learn more »
Ask a Question