2000 Dodge Ram 2500 Recalls
Chrysler has recalled certain 1998-2003 Dodge Ram 1500/2500 models equipped with four-wheel ABS because aftermarket batteries may leak electrolyte onto the ABS control module connector, which can compromise the sealing integrity. This may allow development of a short circuit in the connector, which could eventually lead to a fire. Dealers will inspect the ABS control module connector for electrolyte damage and replace it if necessary.
Chrysler has recalled certain 2000-2001 Dodge Ram 1500/2500 models without power front seats because in the presence of road salt, water, or other road debris, the power seat connector located beneath the driver's seat could develop a high resistive short circuit that cycles the circuit breaker. If the circuit breaker cycles for an extended period of time, the resulting heat could start a fire. Owners and dealers will receive instructions for removing the circuit breaker from the fuse panel.
Chrysler is recalling certain 1997-2000 Dodge Dakota, 1998-2000 Dodge Durango, and 1997-2001 Dodge Ram 1500/2500 models because sound deadening material inside the steering wheel may become dislodged and interfere with the clock spring ribbon, which can cause an open electrical circuit. An open circuit in the clock spring will illuminate the air bag warning light and disable the air bag system. With the air bag system disabled, there is an increased chance of injury in the event of a crash. Dealers will replace the clock spring to correct this concern.
Chrysler has recalled certain 2000 Dodge Ram 1500/2500 models with ABS systems because some vehicles may have inadequate clearance between the front tire/wheel and the brake hose/ABS sensor wire assembly, which can cause them to come into contact with each other. This can lead to wire damage or a hole in the brake line, which adversely affects braking performance. Dealers will replace the front brake hose assemblies and the ABS sensor wire will be inspected and replaced if necessary.
Chrysler has recalled certain 1998-2000 Dodge Ram 1500/2500 trucks equipped with the optional trailer hitch. The trailer hitch side brackets are composed of a material with insufficient strength, which could fatigue and fracture in the area where the trailer hitch mounts to the frame. Dealers will inspect the trailer hitches and replace any trailer hitch showing signs of fatigue cracking. If no evidence of cracking exists, the dealer will install two reinforcement brackets.
Chrysler has recalled certain 2000 Dodge Ram 1500/2500 models because the welds at the right side lower control arm bracket to axle tube attachment may have inadequate fatigue life due to poor weld quality. This can cause the control arm bracket to separate from the axle tube. This may result in reduced directional stability, braking degradation, and/or vehicle pull under braking. Dealers will replace the front axle with a properly welded front axle.