X

2010 Dodge Ram 1500 Recalls

Drive Train,February 6, 2013
RepairPal Expert Overview:

The nut securing the rear axle pinion my loosen because an adhesive patch was not installed during vehicle assembly. If the nut loosens, the axle can lock up with little warning, resulting in a loss of vehicle control and/or a crash. Dealers will install a pinion nut retainer to correct this concern. This is an expansion of a previous recall, NHTSA number 12V474000, Chrysler number M34. The Chrysler recall number for this recall is N08.

Drive Train,September 28, 2012
RepairPal Expert Overview:

The rear axle pinion nut may loosen due to a lack of adhesive. If the rear axle pinion nut loosens, the axle can lock up and cause a loss of vehicle control and/or a vehicle crash with little warning. Dealers will install a pinion nut retainer to correct this concern. The Chrysler recall number is M34.

Brakes,December 7, 2010
RepairPal Expert Overview:

Chrysler is recalling certain 2010-2011 Dodge Ram trucks equipped with a diesel engine and hydroboost brake system because the brake pedal may be slow to return after brake application. A slow returning brake pedal will cause the brake lights to be slow to extinguish, which can increase the risk of a crash. Dealers will replace the power steering reservoir cap in order to lessen the vent pressure in the reservoir.

Electrical & Lights,August 23, 2010
RepairPal Expert Overview:

Chrysler is recalling 2010 Chrysler 300, Dodge Challenger, Charger, Jeep Commander, Grand Cherokee, and Dodge Ram vehicles due to a problem with the wireless ignition node (Win) module, which can exhibit a binding condition of the solenoid latch. It's possible that the key can be removed from the ignition switch prior to placing the shifter in "Park," which can cause unintended vehicle movement. Dealers will inspect and replace the Win module free of charge.

Brakes,August 16, 2010
RepairPal Expert Overview:

Chrysler has recalled certain 2010 Dodge Nitro, Dodge Ram, Jeep Liberty, and Jeep Wrangler models because they may have been built with an improperly formed master cylinder to hydraulic control unit (HCU) brake tube assembly end flare. This can lead to a loss of brake fluid and reduced braking performance, increasing the risk of a crash. Dealers will replace the brake tubes free of charge.

Brakes,February 1, 2010
RepairPal Expert Overview:

Some vehicles may have been assembled with a deformed brake booster input rod retainer or no retainer at all. As a result, the brakes may fail without warning, increasing the risk of a crash. Dealers will install a new brake booster input rod retainer to correct this problem. This recall is expected to begin during February 2010. The Chrysler recall number is J37.