2009 Dodge Journey Recalls
If the ignition key unexpectedly moves to the OFF or ACCESSORY position, the engine will turn off. This will depower various safety systems including but not limited to airbags, power steering, and power braking. Loss of functionality of these systems may increase the risk of crash and/or injury in the event of a crash. The weight of extra items on the ignition key ring can be a contributing factor to this unexpected occurrence. Until this recall is completed customers are advised to remove all other items from the ignition key ring. Dealers will modify the ignition switch to correct this concern.
Chrysler is recalling certain 2009 Dodge Journey vehicles due to possible loss of crash-sensing capability and illumination of the airbag warning light as a result of damaged wires in one or both doors. In the event of a crash, the side airbag may not deploy, increasing the risk of injury. Dealers will replace the left and right door wiring harness.
Wiring may be reversed on the steering column control module driver's air bag connector and cause the driver air bag not to deploy. If the driver's air bag does not inflate when needed, the risk of injuries to the driver is increased. Dealers will inspect the driver's air bag squib wires and replace the steering column control module. The recall began in May, 2009. The recall number is J13.
On vehicles not equipped with a 115V auxiliary power outlet, the electrical connector that would be used for the outlet may become corroded and overheat. If the 25-amp fuse does not blow, the connector could overheat and catch fire. Dealers will re-route and stow the 115-volt power outlet connector and remove the 25-amp fuse. This recall is expected to begin by March 30, 2009. The Chrysler recall number is J09.
Chrysler is recalling 2009 Sebring, Dodge Caliber, Avenger, Journey, Jeep Patriot, and Compass models due to a new adhesive in the PCM manufacturing process that can cause the printed circuit board to break. This may cause the engine to stall and cause a crash without warning. Dealers will replace the PCM free of charge.
The engine wiring harness may rub on the transaxle mount, causing damage to the harness and a fire hazard. Dealers will inspect the harness for damage, repairing and securing it as necessary free of charge to resolve the concern.