X

2002 Dodge Dakota Recalls

Drive Train,December 24, 2007
RepairPal Expert Overview:

Chrysler is recalling certain 2001-2002 Dodge Dakota, Durango, Ram 1500, Ram 2500, and Ram 3500 models because the park shift interlock system may not function correctly. When this system fails, the shifter can be moved out of the "Park" position with the ignition in the "lock" position. The ignition key can also be removed when the shifter is not in the "Park" position. Either of these conditions could allow the vehicle to roll away unexpectedly, possibly resulting in a crash. Dealers will replace the gearshift blocker and bracket assembly.

Suspension & Steering,December 21, 2004
RepairPal Expert Overview:

Chrysler is recalling certain 2000-2003 Dodge Dakota and Durango 4WD models because the front upper ball joints may wear out prematurely. Water intrusion can cause rust to develop, which will accelerate wear and cause a clunking noise in the front suspension, which may or may not be heard by the vehicle occupants. Excessive wear may allow the ball joint to separate, which could result in loss of vehicle control. Dealers will replace both front upper ball joints to correct this issue.

Body, Interior & Misc.,July 12, 2004
RepairPal Expert Overview:

Chrysler is recalling certain 2002-2004 Dodge Dakota and 2002-2003 Dodge Durango models because the front windshield wipers may stop working. This is a result of corrosion in the wiper motor due to water intrusion. Failure of the windshield wiper may result in reduced visibility, increasing the chance of a crash. Dealers will replace the front windshield wiper module to correct this concern.

Body, Interior & Misc.,March 1, 2004
Summary:ON CERTAIN MINIVANS AND 4X2 PICKUP TRUCKS, THE VEHICLE CERTIFICATION LABEL MAY HAVE GROSS AXLE WEIGHT RATINGS (GAWR) THAT EXCEED THE MAXIMUM TIRE LOAD CAPACITY AS DEFINED IN FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 120, ¿TIRE SELECTION AND RIMS FOR MOTOR VEHICLES OTHER THAN PASSENGER CARS.¿
Electrical & Lights,November 3, 2003
RepairPal Expert Overview:

The dashboard wiring harness may be damaged by operation of the clutch pedal. This can cause erratic operation of the wipers, turn signals, horn, or lighting systems, which could increase the risk of a crash. Dealers will inspect, repair if necessary, and reroute the wire harness to correct this issue.