1998 Dodge Dakota Recalls

Body, Interior & Misc.,June 18, 2001
RepairPal Expert Overview:

Chrysler is recalling certain 1997-2000 Dodge Dakota, 1998-2000 Dodge Durango, and 1997-2001 Dodge Ram 1500/2500 models because sound deadening material inside the steering wheel may become dislodged and interfere with the clock spring ribbon, which can cause an open electrical circuit. An open circuit in the clock spring will illuminate the air bag warning light and disable the air bag system. With the air bag system disabled, there is an increased chance of injury in the event of a crash. Dealers will replace the clock spring to correct this concern.

Brakes,September 11, 2000
RepairPal Expert Overview:

Vehicles may not have adequate clearance between the left front brake tube and the power steering hose, which can cause the brake tube to wear and a brake fluid leak. Loss of brake fluid can reduce braking efficiency, increasing the risk of a crash. Dealers will inspect the brake tube and power steering hose for wear and replace them if necessary. A power steering bracket will be installed to insure adequate clearance between the brake pipe and power steering hose.


Brakes,August 21, 2000
RepairPal Expert Overview:

The rear axle vent hose may contact the rear brake hose, causing damage to the hose and a possible brake fluid leak. Brake fluid loss can result in a loss of braking efficiency, which may increase the risk of a crash. Dealers will inspect the rear brake hose for wear and worn hoses will be replaced. In addition, the rear axle vent hose will be shortened and secured to assure adequate clearance.

Body, Interior & Misc.,September 21, 1998
RepairPal Expert Overview:

Chrysler is recalling certain 1998 Dodge Dakota, Ram 1500, and Ram 2500 models because the bolts used to attach the cab and core support to the frame may fail. This may cause the cab to separate from the frame and increase the risk of a crash. Dealers will replace the affected bolts with properly hardened ones.


Brakes,November 15, 1997
RepairPal Expert Overview:

A front brake hose or anti-lock brake system (ABS) wheel speed sensor wire may be damaged by contact with the wheelhouse splash shield. A damaged brake hose may leak brake fluid, reducing braking efficiency and/or illuminating the brake warning light. A damaged ABS sensor wire may illuminate the the ABS warning light and/or cause a loss of ABS function. This may result in reduced braking efficiency and an increased risk of a crash. Dealers will trim the front wheelhouse splash shields and inspect the brake hoses and sensor wire. Hoses and sensor wires showing signs of abrasion will be replaced.