If the engine cranks but does not start, it may be caused by a tripped inertia switch. Switch the key to "ON" and the fuel pump should be heard running for a second or two. Listen at the gas filler if necessary. The inertia switch is located on the firewall and can be tripped when the parking brake is set too hard and then released. The inertia switch should be reset, and will click when it is reset.
Crank but No Start Condition and No Fuel Pressure on Mazda B3000
Average mileage: (–)
16 people reported this problem
2 people shared problem details
driving and engine went dead checked inherta switch its fine need to find relays and fuses to check before buying fuel pump
1994 Mazda B3000Visitor
Crank but will not start
Randomly I will turn the key with the clutch depressed and the struck won't start. If I let the truck roll a few feet then try it again it starts. Why? And how do I fix it?
Engine has trouble starting when truck sits for a few hours or more. Won't crank, just makes a loud clunk or click. I can turn the key, and it will clunk each time, and eventually it starts. Runs and starts up great when engine is warmed up. What's wrong?
Like I said, it runs and starts up perfectly once the engine is warmed up. If I turn the truck...
I received the truck as a "gift" knowing I had to replace the springs and spring mounts. The t...
Starts easily after initial start No check eng light
I thought I was leaking coolant from the water pump. When I warmed it up to check it wouldn't l...