2013 Cadillac XTS Recalls

Brakes,March 17, 2014
RepairPal Expert Overview:

Corrosion may develop at the brake booster pump connector at the pump relay due to a missing cavity plug. This corrosion can cause excessive heat, resulting in the connector melting and possibly catching on fire. Dealers will apply sealant to the affected connector cavity plugs and re-route the vacuum pump vent hose. If damaged, the front body wiring harness will be replaced as necessary.

Body, Interior & Misc.,May 24, 2013
RepairPal Expert Overview:

Certain vehicles are being recalled because of concerns with the brake lights and cruise control operation. The brake lights can come on when the brakes are not applied and/or the cruise control may disengage. These functions are controlled by the Body Control Module (BCM). Your GM dealer will reprogram the BCM to correct this concern.

Body, Interior & Misc.,October 31, 2012
RepairPal Expert Overview:

The rear seat head restraints may not lock in the upright position after being folded forward. If the head restraint is at its lowest position and it falls forward, it will not meet the height required by the federal safety standards. In the event of a vehicle crash, the lowered head restraint may increase the occupant's risk of neck injury. General Motors dealers will replace the affected head restraints to correct this concern. The General Motors recall number is 12258.