The brake system vacuum pump check valve can leak oil and contaminate the power brake booster. This can result in loss of power brake assist. Dealers will repair the vehicle as necessary free of charge to resolve concerns.
BMW 545i Recalls
Certain passenger vehicles may have been built with incorrectly manufactured transmission guide plate part. This may cause the parking lock system to not activate when the transmission is placed in park. If the vehicle is parked on an incline and the parking brake is not engaged the vehicle may roll away causing an accident. The dealer will repair and replace the automatic transmission guide plate free of charge. The campaign # is 05V504000
Excessive wear may develop on the side bolsters of the seat backrest. As a result, the seat heater mat located in this area may be damaged. If such damage were to occur, with the system turned on, the occupant may feel excessive heat from the area. The heating element may damage or melt a small hole in this damaged area of the seat cover. If this happened, it could lead to the seat occupant being burned. Dealers will modify the seat heating circuit to correct this concern. This recall is expected to begin during December of 2004.
The digital management control (EMC) unit may not have been produced according to specification. The engine may stall and not restart. As a result, a loss of power steering, and after repeated actuation of the brake pedal, a loss of brake power assist will occur. These conditions could result in a vehicle crash. Dealers will install a new (EMC) unit to correct this issue. This recall began on July 16, 2004.
A circular retention clip at the quick-release fuel line coupling was inadvertently not installed. In the event of a severe frontal crash, the quick release coupling could separate, causing fuel leakage. Any fuel leak always increases the risk of a fire. Dealers will install a retention clip at the quick-release coupling on the fuel supply line. The recall began on July 5, 2004.