The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.
When a tire pressure monitoring sensor fails, the tire pressure monitoring system control module will recognize a loss in communication and turn on the warning lamp which indicates the failure. This is most often the case. However, the tire pressure monitoring sensor may also fail by reporting incorrect tire pressures. This could cause a flat tire to go unrecognized, or a properly inflated tire to signal a low or high tire pressure warning.
When a relearn is needed, for any reason, the TPMS warning light will illuminate, and many vehicles will display a message relating to the TPMS system being inoperative or loosing communication. It is important to keep a watchful eye on tire pressures when this system is having issues because there is no warning available for underinflation or overinflation of the tires.
Wheels offer very few symptoms, but these symptoms should never be ignored. Visible cracks on the wheels may appear, especially after hitting a large bump, Most often, this will also be accompanied by loss of air from the tire on that wheel. Also, vibration in the steering wheel is very common when the tire is out of balance, and improper wheel nuts or bolts can cause creaking and popping noises to develop. Again, there are very few symptoms, but they should not be ignored.
The only symptoms requiring diagnosis for the tire pressure monitoring system warning lamp is if the warning lamp has illuminated while the tires have correct air pressure, or if the air pressure for the tires is out of specification and the warning lamp is off. This is because the overwhelming majority of cases where the TPMS lamp illuminates is due to the change in ambient temperature.
To effectively diagnose the tire pressure warning light issue in your 2017 Toyota Corolla, begin with a thorough assessment of your tire pressure. Utilize a tire pressure gauge to check each tire, ensuring that the pressure aligns with the recommended PSI found in your owner's manual or on the driver's side door jamb. Next, conduct a visual inspection of the tires for any signs of damage, such as punctures or bulges, and look for foreign objects lodged in the tread that could lead to air loss. If you find any discrepancies in tire pressure, adjust it using an air compressor to achieve the correct levels. After making these adjustments, it may be necessary to reset the tire pressure monitoring system (TPMS) to clear the warning light; refer to your owner's manual for specific reset instructions. If the warning light persists despite these efforts, it may indicate a more complex issue with the TPMS sensors, at which point seeking assistance from a certified mechanic or dealership is advisable. By following this diagnostic approach, you can systematically address the tire pressure warning light and ensure your vehicle's safety and performance.
When the tire pressure warning light stays on in a 2017 Toyota Corolla, it can indicate several underlying issues that need attention. The most frequent cause is low tire pressure, which can be easily checked and adjusted to meet the manufacturer's specifications. If the tire pressure is adequate, the problem may stem from a faulty tire pressure sensor that might require replacement to function correctly. Additionally, the sensor's battery could be low or dead, necessitating a replacement to ensure accurate pressure readings. In some cases, recalibrating the tire pressure sensors can help resolve any discrepancies in the readings. Furthermore, a malfunction within the tire pressure monitoring system, such as wiring issues or a faulty control module, may also be responsible, which would require a diagnostic test by a qualified technician. It is essential to address these issues promptly to maintain the safety and performance of your vehicle, highlighting the importance of regular maintenance and timely troubleshooting for the tire pressure monitoring system.
Addressing the tire pressure warning light in your 2017 Toyota Corolla is not just a matter of convenience; it is a critical safety issue that demands immediate attention. Ignoring this warning can lead to serious consequences, including compromised vehicle handling and increased risk of accidents due to poor traction and braking performance. Low tire pressure can also accelerate tire wear, resulting in costly replacements and the potential for dangerous blowouts while driving. Furthermore, underinflated tires can significantly reduce fuel efficiency, leading to higher fuel costs over time. To ensure your safety and the longevity of your vehicle, it is essential to check your tire pressure as soon as the warning light activates, inflate the tires to the manufacturer’s recommended levels, and investigate any underlying issues that may be causing the alert. Regular maintenance and monitoring of tire pressure are vital for optimal vehicle performance and safety on the road.
Read about related problems experienced by other Toyota Corolla drivers like you.
See what others are asking about their Toyota Corolla. Get answers from RepairPal's community of auto experts and enthusiasts.
