What is your question?
·
·
What is your question?
after I was done the battery had run down so I jump started it and let it run for awhile to charge it. On Tues morning I started it up and when I went to put in drive it wouldn't Move! The Tach was at 100 and my speedo climbed to 90 MPH! when I tried to put it in park it started grinding so I had to shut off the engine and put it in Park! I ran my code scanner and it came up with all sorts of sensors that said "P1116 Coolant temp sensor can not do self test" also had code P1127-Exhaust temp sensor can not do self test!? on my final test it gave P1000-Test unable to complete? The Test I ran was a KOER test for Ford/Mazda Obviously it's NOT All Sensors that are broke! Can anyone give me a direction to go? I did check all fuses and relays and all were good?! so now I'm stuck and so is my truck seeings how it won't Move! Thanx in advance for any help!
2 Replies
OOPs; Got something screwed up. Try to double check your work and make sure nothing shorted. You might need help to figure this out, but over the net, not much help. Sorry.
Thanx for the quick reply! This is my kid brothers trk and I've asked him several times if maybe he had touched anything to metal?? He said that he didn't have to do any wiring in the dash cause he had a harness for it. However he did have to change some wiring for the rear speakers!? Thats why I checked all the fuses and relays today because I thought he might have shorted something out, seeing as how he didn't disconnect the battery while doing this! (First mistake!) Another person responded that it could be the Transfer case? So I guess I'll be busy tmrw! LOL Thanx so much for answering so quickly!
Coolant sensor, exhaust temp sensor. Sounds like some kind of wiring or circuit issue. Good luck
Thanx I was thinking the same thing. That or he screwed up the ECU and its sending bad info?! Thanx again have a good nite.
Thanx I wasn't sure if it was that or the ECU? Thanx again I'll check it out tmrw.
Put it in 4wd to see if it will move!
Hey Pushrod Thanx it was the Motor in the transfer case! It Seized up and wouldn't move to select a gear!! New motor and it works great!! Definetely glad it wasn't the whole Transfer case!! LOL Thanx again!
Glad to hear you got it fixed!... Thanks for the feedback!!