turning signals

The multi-function switch is located on the steering column, just below the steering wheel. The only visible components of the multi-function switch are two control stalks that extend through each side of the steering column. The multi-function switch housing straddles the steering column tube just below the column lock housing. There are several versions of the multi-function switch to support both optional equipment and equipment that is required only in other markets. Each multi-function switch control stalk has both white nomenclature and International Control and Display Symbol graphics applied to it, which clearly identify its many functions. Each control stalk has a control knob on its end with a flattened face to allow it to be easily rotated. On vehicles equipped with optional front fog lamps, the knob on the end of left control stalk can also be pulled outward to select those lamps. Each control stalk also features a knurled control ring located just below the control knob. The left control stalk is dedicated to providing driver controls for the interior and exterior lighting systems, while the right control stalk is dedicated to providing driver controls for the front and rear wiper systems. Two connectors on the multi-function switch housing connect the switch two the vehicle electrical system through the instrument panel wire harness. The left connector contains nine terminal pins for the lighting control circuits of the switch, while the right connector contains six terminal pins for the wiper control circuits of the switch. The multi-function switch cannot be adjusted or repaired and, if faulty or damaged, must be replaced.

...nevermind....