Power washed motor won't start now

Label all coil's on plug so you will know which spark plug each goes to. Leaving spark plugs installed, remove coil on plugs one at a time and clear moisture from each hole the boots were in and the rubber boots. First using paper towels, then a hair dryer to remove the moisture. Place a small dab of Di-electric grease (available at auto parts stores) on the plug boots so that it will be deposited on the spark plug terminals as the coil on plugs are re-installed.

Won't run but don't the engine look pretty now! That's the usual result from intentionally spraying water onto an engine!!.. None of the electrical componets are 'waterproof'.!