Why won't this car go into the relearn mode after a ignition lock cylinder repla

did you do it like this?may work,may not.might have to have reprogrammed,deal or locksmith Relearn Procedure Turn ON the ignition, with the engine OFF. Attempt to start the engine, then release the key to ON (vehicle will not start). Observe the SECURITY telltale, after approximately 10 minutes the telltale will turn OFF. Turn OFF the ignition, and wait 5 seconds. Repeat steps 1 through 4 two more times for a total of 3 cycles/30 minutes (the vehicle is now ready to relearn the Passlockâ„¢ Sensor Data Code and/or passwords on the next ignition switch transition from OFF to CRANK). IMPORTANT: The vehicle learns the Passlockâ„¢ Sensor Data Code and/or password on the next ignition switch transition from OFF to CRANK. You must turn the ignition OFF before attempting to start the vehicle. Start the engine (the vehicle has now learned the Passlockâ„¢ Sensor Data Code and/or password). With a scan tool, clear any DTCs if needed (history DTCs will self clear after 100 ignition cycles).