2011 Nissan Murano Cruise Control Isn't Working

Common Causes of Cruise Control Malfunctions in Your 2011 Nissan Murano and How to Fix Them

Find Repair Location
Reviewed by
Andrew Hajjar
Written by RepairPal Car Genius
Updated January 14, 2025
0%
30% chance it's the
Sensor
0%
25% chance it's the
Control Module
0%
25% chance it's the
Throttle
0%
20% chance it's
Something else
The most common reasons a 2011 Nissan Murano cruise control isn't working are failed control module, sensor or switch issues, or throttle actuation problems.
  • Sensor: A faulty or malfunctioning sensor can lead to incorrect readings, causing issues with engine performance or other systems relying on accurate data.
  • Control Module: A faulty control module can lead to erratic vehicle behavior or failure of various electronic systems due to improper signal processing.
  • Throttle: A faulty throttle body or a defective accelerator pedal position sensor may be causing inconsistent throttle response.
Proper diagnosis will determine the exact cause of your symptom, saving you money on unnecessary repairs. The diagnostic experts at RepairPal Certified shops have the right tools and experience to solve any symptom.

How much does it cost to fix a 2011 Nissan Murano cruise control isn't working?

Common Repairs

The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.

In the event that a wheel speed sensor fails, the ABS, traction control system (TCS) and manufacturer specific stability control system lights will illuminate, informing the driver that the systems are disabled. The vehicle will be more prone to tire slip, and normal driving patterns may need to be adjusted to correct for the loss of computer control. On older vehicle's, the speedometer can be affected, causing illumination of the check engine light as well.

The cruise control switch can cause complete failure of the cruise control feature, but in a lucky scenario only partial functionality will be lost. This means that the cruise control may come on, but that it will not increase in speed automatically, or the cancel button does not work leading the driver to cancel cruise control with the foot brake. In some vehicles, the cruise control light may illuminate, or a warning message may be displayed due to lack of functionality.

What are the steps to diagnose the cruise control issue in a 2011 Nissan Murano?

To effectively diagnose a cruise control issue in your 2011 Nissan Murano, begin with the simplest checks to avoid unnecessary complications. Start by inspecting the cruise control fuse; a blown fuse can easily disrupt the system's functionality. Next, examine the cruise control buttons on the steering wheel to ensure they are operational, as faulty buttons can prevent engagement. If these initial checks do not reveal the problem, utilize an OBD-II scanner to identify any error codes that may indicate specific malfunctions within the system. Following this, assess the vehicle speed sensor, which is vital for cruise control operation; a malfunction here can lead to failure. Additionally, check the brake pedal switch, as a defective switch can inhibit the cruise control from activating. Finally, if all else fails, test the cruise control module to confirm it is sending the correct signals. By systematically following these steps, you can effectively diagnose and address the cruise control issue in your vehicle.

What are the common problems that could cause the cruise control to stop working in a 2011 Nissan Murano?

When troubleshooting the cruise control system in a 2011 Nissan Murano, it's essential to understand the common problems that could lead to its failure. One of the primary culprits is a faulty brake pedal switch, which is designed to disengage the cruise control when the brake is applied; if this switch malfunctions, it can prevent the system from engaging. Additionally, issues with the speed sensor can disrupt the cruise control's ability to maintain a steady speed, as it relies on accurate speed readings to function correctly. Another potential issue is a blown fuse within the cruise control system, which can easily be checked in the fuse box. Furthermore, a malfunction in the throttle control system, particularly with the throttle position sensor, can hinder the cruise control's performance. Problems with the Electronic Control Module (ECM) can also affect the cruise control, as this component manages various vehicle functions, including cruise control operations. Lastly, vacuum leaks in the engine can interfere with the cruise control system's functionality, making it crucial to inspect for any leaks. By systematically addressing these common issues, you can effectively troubleshoot and potentially resolve the cruise control problems in your Murano.

How urgent is it to address the malfunctioning cruise control in a 2011 Nissan Murano?

Addressing a malfunctioning cruise control system in a 2011 Nissan Murano is of utmost importance due to the significant safety risks it poses. A faulty cruise control can lead to unexpected acceleration or deceleration, creating hazardous driving conditions that could result in accidents. The urgency to resolve this issue cannot be overstated, as neglecting it may not only compromise your safety but also lead to more extensive damage to the vehicle's systems, resulting in costly repairs down the line. Therefore, it is crucial to have the cruise control system inspected and repaired by a qualified mechanic as soon as symptoms arise. Taking prompt action ensures that your vehicle remains safe and reliable on the road, allowing you to drive with confidence.

You’ve got options with RepairPal

Whether you need a more accurate auto repair estimate or help finding a reputable shop in your area, we’ve got you covered.