The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.
When the head gasket begins to fail, the engine may have no symptoms at all. They only begin to occur when the leak has reached an engine oil passage, engine coolant passage or the engine cylinder.
When that happens, the engine may be very difficult to start, and run roughly when idling. There may be oil or coolant leaking, and the engine may begin to overheat, or at least run hot. At this point, there may be coolant in the engine oil pan — this will look creamy and lighter in color than the oil. Also, the radiator or engine coolant reservoir may have a gurgling sound, the presence engine oil, or smell of combustion. And the check engine light will come on.
The coolant being burned in the engine will produce white exhaust that smells sweet, like engine coolant. When the head gasket fails completely, the engine will overheat within minutes of starting, will stall and then won't restart.
A failing heater core may cause the car's interior to smell like engine coolant. The smell will become worse when the heater is turned on. The engine may also begin to run hotter until the vehicle is repaired.
The worst-case scenario is the engine overheating, which can cause extensive engine damage.
If the heater core is clogged, the air that blows when the heater is turned on will not be very hot.
Problems with the intake manifold gasket can create the following symptoms:
» LEARN MORE: Intake manifold gasket symptoms
A failing radiator can cause the engine to run hot or overheat. Most radiators are made of metal and plastic. The plastic parts can become brittle and crack over time, causing a leak of coolant (typically green or pink in color). All manufacturers have a recommended service interval for coolant renewal. As the coolant ages, the additives breakdown and being to form solid deposits. These deposits will build up in the passages of the cooling system and will eventually clog components, including the radiator. A leaking or clogged radiator must be replaced. Some automatic transmission cars will also have a transmission cooler integrated into the radiator. Lines going to and from the transmission circulate transmission fluid to help cool the transmission in heavy duty applications such as towing or off-roading. If this integrated cooler fails, it can allow transmission fluid and coolant to mix. This will causing shifting issues in addition to overheating.
A coolant leak may be noted from the hoses. Coolant hoses can be damaged by oil leaks, or age. This will lead to swelling or cracking, it is suggested to replace the hoses before they begin leaking to avoid potential overheating.
The bad thermostat can cause two different sets of problems, depending on whether it's stuck open or stuck closed.
A thermostat that is stuck open can cause the engine to run colder than normal and turn on the check engine light. It may also cause poor fuel mileage and the heater to blow cool air.
A thermostat that is stuck closed will cause the vehicle to overheat. If a new thermostat doesn't resolve engine temperature problems, the cooling system needs to be checked for other issues.
» LEARN MORE: Signs of a bad thermostat, and how to fix it
If a vehicle is overheating, a bad thermostat could be the problem, and a damaged thermostat housing is more likely to produce a coolant leak, either from a cracked or warped housing or a failed seal to the engine. The thermostat housing can be made of metal or plastic. And the housing can be a stand-alone part that is separate from the thermostat, or (on later model vehicles) can be integrated with the thermostat and replaced as a single unit.
The two most common signs of a bad pump are leaks and noises.
Leaking water pumps can result in damage to the drive and timing belts, and cause the engine to overheat. A failed water pump can be caused by other problems in the cooling system, such as a bad thermostat, radiator or head gasket.
To effectively identify the source of a coolant leak in your 2018 Mazda CX-5, start with a thorough visual inspection under the hood and beneath the vehicle, looking for any signs of wet spots or puddles that could indicate a leak. Next, check the coolant level in the reservoir; a significant drop may suggest a leak is present. If these initial checks do not reveal the issue, consider performing a pressure test on the cooling system, which can help simulate operating conditions and pinpoint the leak's location. Pay close attention to the radiator and hoses, inspecting them for cracks or damage, as these are common culprits. Additionally, examine the water pump and heater core for any signs of leakage, as both can contribute to coolant loss. Finally, inspect gaskets and seals for any wear or damage that might allow coolant to escape. For a more precise diagnosis, you can add UV dye to the coolant, which will illuminate the leak under UV light, making it easier to locate. By following these steps, you can systematically diagnose and address the coolant leak in your vehicle.
When dealing with coolant leaks in a 2018 Mazda CX-5, it's essential to understand the common problems that may arise within the cooling system. One of the primary culprits is damaged hoses, which can develop cracks or wear over time, leading to leaks. Additionally, a faulty radiator, often characterized by corrosion or physical damage, can also be a significant source of coolant loss. The water pump, responsible for circulating coolant, may develop leaks as it ages, while a cracked radiator cap can allow coolant to escape from the system. Furthermore, loose or damaged clamps that secure hoses can contribute to leaks, as can a leaking heater core, which is another potential issue. If you suspect a coolant leak, it's crucial to conduct a thorough inspection of these components to identify and address the problem promptly, ensuring the longevity and performance of your vehicle.
Addressing a coolant leak in your 2018 Mazda CX-5 is not just a matter of routine maintenance; it is a critical safety concern that requires immediate attention. Coolant plays a vital role in regulating engine temperature, and a leak can lead to overheating, which poses a significant risk of engine damage. If left unchecked, the engine may run excessively hot, potentially resulting in catastrophic failure and costly repairs. Moreover, a coolant leak can diminish your vehicle's performance and fuel efficiency, making it essential to monitor coolant levels regularly. By promptly addressing any signs of a leak, you not only safeguard your engine's health but also enhance the longevity and reliability of your Mazda CX-5. Therefore, if you notice any symptoms of a coolant leak, such as puddles under the vehicle or a drop in coolant levels, it is crucial to act swiftly to prevent more severe issues down the line.
Read about related problems experienced by other Mazda CX-5 drivers like you.
See what others are asking about their Mazda CX-5. Get answers from RepairPal's community of auto experts and enthusiasts.