2010 Lexus GS350 Cruise Control Isn't Working

Common Causes of Cruise Control Malfunctions in Your 2010 Lexus GS350 and How to Fix Them

Find Repair Location
Reviewed by
Aisha
Written by RepairPal Car Genius
Updated January 14, 2025
0%
30% chance it's the
Sensor
0%
25% chance it's the
Control Module
0%
25% chance it's the
Throttle
0%
20% chance it's
Something else
The most common reasons a 2010 Lexus GS350 cruise control isn't working are failed control module, sensor or switch issues, or throttle actuation problems.
  • Sensor: A faulty or malfunctioning sensor can lead to incorrect readings, causing issues with engine performance or other systems relying on accurate data.
  • Control Module: A faulty control module can lead to erratic vehicle behavior or failure of various electronic systems due to improper signal processing.
  • Throttle: A faulty throttle body or a defective accelerator pedal position sensor may be causing inconsistent throttle response.
Proper diagnosis will determine the exact cause of your symptom, saving you money on unnecessary repairs. The diagnostic experts at RepairPal Certified shops have the right tools and experience to solve any symptom.

How much does it cost to fix a 2010 Lexus GS350 cruise control isn't working?

Common Repairs

The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.

When the vehicle speed sensor fails or the wiring harness prevents signal transmission, the speedometer is the first thing that will stop functioning properly. This can be an intermittent issue where the speedometer only works occasionally, the speedometer may cease all function, or the speedometer may read erratically or incorrectly. Also, the traction control and anti lock brake warning lights specific to each vehicle may be illuminated, depending on the design of those systems. You may notice the vehicle hesitate to accelerate, cruise control will not function properly, and the vehicle may not shift properly through all of the gears.

In the event that a wheel speed sensor fails, the ABS, traction control system (TCS) and manufacturer specific stability control system lights will illuminate, informing the driver that the systems are disabled. The vehicle will be more prone to tire slip, and normal driving patterns may need to be adjusted to correct for the loss of computer control. On older vehicle's, the speedometer can be affected, causing illumination of the check engine light as well.

The cruise control switch can cause complete failure of the cruise control feature, but in a lucky scenario only partial functionality will be lost. This means that the cruise control may come on, but that it will not increase in speed automatically, or the cancel button does not work leading the driver to cancel cruise control with the foot brake. In some vehicles, the cruise control light may illuminate, or a warning message may be displayed due to lack of functionality.

What are the initial diagnostic steps to troubleshoot the non-functioning cruise control in a 2010 Lexus GS350?

When troubleshooting the non-functioning cruise control in a 2010 Lexus GS350, it's essential to adopt a systematic diagnostic approach. Start by checking the cruise control fuse, as a blown or damaged fuse can often be the simplest fix. Next, inspect the cruise control switch located on the steering wheel for any signs of damage or malfunction, as this component directly controls the system. Following this, verify the functionality of the vehicle speed sensor, which is critical for the cruise control to operate correctly. Additionally, examine the brake pedal switch, since the cruise control is designed to disengage when the brakes are applied; a faulty switch could be the culprit. It’s also wise to scan the vehicle's onboard diagnostic system for any error codes that may provide insight into the issue. Lastly, ensure that all electrical connections related to the cruise control system are secure and undamaged. By methodically following these steps, you can effectively identify and address the underlying problems affecting your cruise control system.

What are the common problems that could cause the cruise control to stop working in a 2010 Lexus GS350?

When the cruise control in a 2010 Lexus GS350 ceases to function, it can be frustrating, but understanding the common problems can help you troubleshoot effectively. One of the primary culprits is a faulty brake pedal switch, which is crucial for disengaging the cruise control when the brake is applied. If this switch malfunctions, it may prevent the system from engaging at all. Additionally, issues with the speed sensor can disrupt the cruise control's ability to maintain a steady speed, leading to erratic performance. A blown fuse is another straightforward issue that can halt the cruise control system, so checking the fuses related to this function is a good first step. Furthermore, a malfunctioning throttle actuator can impede the system's ability to control speed, while problems with the Electronic Control Module (ECM) can affect various vehicle functions, including cruise control. By identifying these common issues, you can take the necessary steps to diagnose and potentially fix the cruise control system in your Lexus GS350, ensuring a smoother driving experience.

How urgent is it to address the non-functioning cruise control in a 2010 Lexus GS350?

When considering the urgency of fixing a non-functioning cruise control in a 2010 Lexus GS350, it's essential to recognize that while it may not pose an immediate safety threat, the implications of ignoring the problem can lead to significant inconveniences. A malfunctioning cruise control system can detract from the driving experience, particularly on long trips where maintaining a steady speed is crucial for comfort and fatigue reduction. Moreover, neglecting this issue could result in further complications, such as increased wear on the vehicle's engine and transmission due to inconsistent speed management. For DIY enthusiasts, addressing this problem promptly not only enhances driving satisfaction but also prevents potential escalation into more serious mechanical issues. Therefore, while it may not be an emergency, taking the time to diagnose and repair the cruise control system is a wise decision that contributes to the overall performance and reliability of your vehicle.

You’ve got options with RepairPal

Whether you need a more accurate auto repair estimate or help finding a reputable shop in your area, we’ve got you covered.