The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.
When the throttle position sensor fails, the engine's computer tends to overcompensate with fuel, leading black exhaust coming from the tailpipe. There is a strong possibility of engine misfires, and the check engine light will come on.
Throttle position sensors can also develop "dead spots," or certain places along the throttle curve where it doesn't get a reading. When this happens, the above symptoms can occur but then stop when you further press or let off the gas pedal.
When the vehicle speed sensor fails or the wiring harness prevents signal transmission, the speedometer is the first thing that will stop functioning properly. This can be an intermittent issue where the speedometer only works occasionally, the speedometer may cease all function, or the speedometer may read erratically or incorrectly. Also, the traction control and anti lock brake warning lights specific to each vehicle may be illuminated, depending on the design of those systems. You may notice the vehicle hesitate to accelerate, cruise control will not function properly, and the vehicle may not shift properly through all of the gears.
In the event that a wheel speed sensor fails, the ABS, traction control system (TCS) and manufacturer specific stability control system lights will illuminate, informing the driver that the systems are disabled. The vehicle will be more prone to tire slip, and normal driving patterns may need to be adjusted to correct for the loss of computer control. On older vehicle's, the speedometer can be affected, causing illumination of the check engine light as well.
If the cruise control refuses to turn on at all, the actuator could be at fault. Likewise, if the cruise control stays on but does not maintain a consistent speed, the problem could be a bad actuator. In extreme cases, a malfunctioning actuator could cause the throttle to stick and prevent the vehicle from slowing down. These symptoms may point to a bad actuator. They may also point to other problems with the cruise control and related systems.
The cruise control switch can cause complete failure of the cruise control feature, but in a lucky scenario only partial functionality will be lost. This means that the cruise control may come on, but that it will not increase in speed automatically, or the cancel button does not work leading the driver to cancel cruise control with the foot brake. In some vehicles, the cruise control light may illuminate, or a warning message may be displayed due to lack of functionality.
A faulty cruise control module will simply result in deactivation of cruise control settings. This is because a detected error in the cruise control system could lead to hazardous driving conditions, so the module will be disabled, and the cruise control system warning light will be displayed. This will be a different message depending on make and model, and a warning light or message may be displayed on the driver instrument cluster.
When diagnosing the non-functional cruise control in a 1999 Isuzu VehiCROSS, it's crucial to follow a methodical diagnostic approach that starts with the simplest solutions before moving on to more complex issues. Begin by checking the fuse related to the cruise control system, as a blown fuse is a common and easily fixable problem. If the fuse is intact, the next step is to inspect the cruise control switch to ensure it is working properly, since a faulty switch can prevent the system from engaging. After that, examine the vacuum lines for any leaks or damage, as these can disrupt the operation of the cruise control. If these preliminary checks do not resolve the issue, test the cruise control module, which may be malfunctioning. Additionally, verify the speed sensor's functionality, as it is essential for providing accurate speed information to the cruise control system. Finally, using a diagnostic scanner to check for error codes can help uncover any hidden issues. By systematically following these steps, you can effectively diagnose and address the root cause of the cruise control malfunction in your Isuzu VehiCROSS.
When troubleshooting the cruise control system in a 1999 Isuzu VehiCROSS, it's essential to understand the common problems that may lead to its failure. One of the primary culprits could be a faulty cruise control switch, which may prevent the system from engaging or disengaging as intended. Additionally, a blown fuse can disrupt the electrical flow necessary for the cruise control to function, while vacuum leaks can compromise the system's operation by affecting the pressure needed to maintain speed. Another critical component is the speed sensor; if it malfunctions, the cruise control may struggle to keep a constant speed. Furthermore, issues with the brake light switch can interfere with the system's ability to engage or disengage, as the cruise control relies on this switch to know when to deactivate. Lastly, a malfunctioning throttle cable can hinder the system's performance, making it difficult to maintain the desired speed. By identifying these potential issues, DIY enthusiasts can better diagnose and address the problems affecting their vehicle's cruise control system.
Repairing the non-functioning cruise control in a 1999 Isuzu VehiCROSS should be approached with a sense of urgency, even if it may not seem as critical as other safety-related repairs. The cruise control system is designed to enhance driving comfort and efficiency, particularly on long journeys, by allowing the driver to maintain a steady speed without constant foot pressure on the accelerator. When this system fails, it not only diminishes the driving experience but can also lead to increased fatigue during extended trips, which may compromise overall safety. Furthermore, a malfunctioning cruise control could signal deeper issues within the vehicle's electronic systems or sensors, potentially affecting other critical components. While it may not pose an immediate safety risk like brake or airbag failures, timely repair of the cruise control is essential to ensure the vehicle operates smoothly and to prevent further complications that could arise from neglecting the issue. Addressing this repair promptly will help maintain the vehicle's functionality and enhance the driving experience.
Read about related problems experienced by other Isuzu VehiCROSS drivers like you.
See what others are asking about their Isuzu VehiCROSS. Get answers from RepairPal's community of auto experts and enthusiasts.