Isuzu VehiCROSS Cruise Control Isn't Working

Common Causes of Cruise Control Malfunctions in Your Isuzu VehiCROSS and How to Fix Them

Find Repair Location
Reviewed by
Aisha
Written by RepairPal Car Genius
Updated January 14, 2025
0%
30% chance it's the
Sensor
0%
25% chance it's the
Control Module
0%
25% chance it's the
Throttle
0%
20% chance it's
Something else
The most common reasons a Isuzu VehiCROSS cruise control isn't working are failed control module, sensor or switch issues, or throttle actuation problems.
  • Sensor: A faulty or malfunctioning sensor can lead to incorrect readings, causing issues with engine performance or other systems relying on accurate data.
  • Control Module: A faulty control module can lead to erratic vehicle behavior or failure of various electronic systems due to improper signal processing.
  • Throttle: A faulty throttle body or a defective accelerator pedal position sensor may be causing inconsistent throttle response.
Proper diagnosis will determine the exact cause of your symptom, saving you money on unnecessary repairs. The diagnostic experts at RepairPal Certified shops have the right tools and experience to solve any symptom.

How much does it cost to fix a Isuzu VehiCROSS cruise control isn't working?

Common Repairs

The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.

When the throttle position sensor fails, the engine's computer tends to overcompensate with fuel, leading black exhaust coming from the tailpipe. There is a strong possibility of engine misfires, and the check engine light will come on.

Throttle position sensors can also develop "dead spots," or certain places along the throttle curve where it doesn't get a reading. When this happens, the above symptoms can occur but then stop when you further press or let off the gas pedal.

When the vehicle speed sensor fails or the wiring harness prevents signal transmission, the speedometer is the first thing that will stop functioning properly. This can be an intermittent issue where the speedometer only works occasionally, the speedometer may cease all function, or the speedometer may read erratically or incorrectly. Also, the traction control and anti lock brake warning lights specific to each vehicle may be illuminated, depending on the design of those systems. You may notice the vehicle hesitate to accelerate, cruise control will not function properly, and the vehicle may not shift properly through all of the gears.

In the event that a wheel speed sensor fails, the ABS, traction control system (TCS) and manufacturer specific stability control system lights will illuminate, informing the driver that the systems are disabled. The vehicle will be more prone to tire slip, and normal driving patterns may need to be adjusted to correct for the loss of computer control. On older vehicle's, the speedometer can be affected, causing illumination of the check engine light as well.

If the cruise control refuses to turn on at all, the actuator could be at fault. Likewise, if the cruise control stays on but does not maintain a consistent speed, the problem could be a bad actuator. In extreme cases, a malfunctioning actuator could cause the throttle to stick and prevent the vehicle from slowing down. These symptoms may point to a bad actuator. They may also point to other problems with the cruise control and related systems.

The cruise control switch can cause complete failure of the cruise control feature, but in a lucky scenario only partial functionality will be lost. This means that the cruise control may come on, but that it will not increase in speed automatically, or the cancel button does not work leading the driver to cancel cruise control with the foot brake. In some vehicles, the cruise control light may illuminate, or a warning message may be displayed due to lack of functionality.

A faulty cruise control module will simply result in deactivation of cruise control settings. This is because a detected error in the cruise control system could lead to hazardous driving conditions, so the module will be disabled, and the cruise control system warning light will be displayed. This will be a different message depending on make and model, and a warning light or message may be displayed on the driver instrument cluster.

Troubleshooting Cruise Control Issues in an Isuzu VehiCROSS

When troubleshooting cruise control issues in your Isuzu VehiCROSS, it's essential to adopt a systematic diagnostic approach. Begin by checking the fuse box for any blown fuses related to the cruise control system, as this is a straightforward fix that can often resolve power supply issues. Next, inspect the cruise control cancel switch signal, as a malfunction here can trigger diagnostic trouble codes that affect system performance. It's also crucial to verify that your brake lights are functioning correctly, since a faulty brake light can disrupt the cruise control operation. Pay attention to the brake pedal switch as well; if it's defective, it may prevent the cruise control from engaging altogether. Lastly, if you've recently performed repairs on your vehicle, consider whether any components related to the cruise control system were inadvertently affected. By following this methodical approach, you can efficiently identify and address the root cause of your cruise control issues, making your DIY troubleshooting efforts more effective.

What Could Cause the Cruise Control to Malfunction in an Isuzu VehiCROSS?

When dealing with cruise control malfunctions in an Isuzu VehiCROSS, it's essential to consider several common problems that could be at fault. One frequent issue is a failed control module, which can disrupt the entire cruise control system. Additionally, sensor or switch failures, particularly with the throttle position sensor, can lead to erratic engine behavior, such as excessive black exhaust. A blown fuse or a malfunctioning brake pedal switch is another typical culprit, as these components are crucial for the cruise control to function correctly. Furthermore, problems within the throttle control system or the anti-lock braking system (ABS) can also hinder cruise control operation. In older models, a broken vacuum line may be the root cause of the malfunction. Lastly, if the cruise control module located on the steering column is defective, it may prevent activation despite the power light indicating otherwise. By understanding these potential issues, DIYers can effectively troubleshoot and address cruise control problems in their Isuzu VehiCROSS.

Why is the Cruise Control Not Working in an Isuzu VehiCROSS?

When the cruise control in your Isuzu VehiCROSS is not functioning, it is crucial to address the issue without delay. Ignoring symptoms such as sudden disengagement or failure to activate can lead to unsafe driving conditions, particularly on long trips where maintaining speed is essential for safety. A malfunctioning cruise control system may indicate underlying problems, such as a blown fuse or a defective brake pedal switch, which could compromise your vehicle's overall performance. Additionally, issues with the throttle control system or the ABS can escalate if not resolved, potentially leading to more significant and costly repairs. In older models, broken vacuum lines can also contribute to cruise control failure, and neglecting these can result in further damage over time. Therefore, diagnosing the specific cause of the malfunction is not just a matter of convenience; it is a safety imperative that ensures your vehicle operates reliably and efficiently. Taking prompt action can prevent minor issues from developing into major safety hazards, making it essential for any DIY enthusiast to prioritize these repairs.

You’ve got options with RepairPal

Whether you need a more accurate auto repair estimate or help finding a reputable shop in your area, we’ve got you covered.