2006 INFINITI G35 Has A Vacuum Leak

Diagnosing Vacuum Leaks in Your 2006 INFINITI G35: Symptoms, Causes, and Repair Solutions

Find Repair Location
Reviewed by
Andrew Hajjar
Written by RepairPal Car Genius
Updated January 14, 2025
0%
40% chance it's the
Leaking Vacuum Hoses
0%
30% chance it's the
Leaking Gaskets and Seals
0%
20% chance it's the
Bad Actuators and Valves
0%
10% chance it's
Something else
The most common reasons a 2006 INFINITI G35 has a vacuum leak are leaking vacuum hoses, leaking gaskets and seals, or bad actuators and valves.
  • Leaking Vacuum Hoses: A cracked or disconnected vacuum hose can lead to a loss of engine vacuum, resulting in poor engine performance and increased fuel consumption.
  • Leaking Gaskets and Seals: Aged or damaged gaskets and seals can lead to fluid leaks, resulting in loss of engine oil or coolant and potential engine damage.
  • Bad Actuators and Valves: A malfunctioning actuator or valve can disrupt the proper operation of the vehicle's systems, leading to issues such as poor engine performance or erratic behavior of components like the HVAC system.
Proper diagnosis will determine the exact cause of your symptom, saving you money on unnecessary repairs. The diagnostic experts at RepairPal Certified shops have the right tools and experience to solve any symptom.

How much does it cost to fix a 2006 INFINITI G35 has a vacuum leak?

Common Repairs

The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.

Problems with the intake manifold gasket can create the following symptoms:

  • Illuminated check engine light
  • Erratic engine performance
  • Oil and coolant leaks
  • Poor gas mileage
  • Stalling

» LEARN MORE: Intake manifold gasket symptoms

Rough idling, lack of power, engine oil leaks, engine burning oil, and illumination of the check engine light are all possible if the PCV valve has clogged. If the check engine light comes on, the on-board diagnostics (OBD) trouble codes will most likely relate to manifold vacuum, air and fuel mixture, PCV system, mass airflow sensor readings, and exhaust and emissions readings. These are all affected in the event the PCV valve is clogged, is stuck fully open, or is stuck fully closed, however, if the valve is stuck fully open, the engine oil seals are not in danger of overpressure.

A bad valve cover gasket will result in an oil leak. You may notice oil under the car or on other parts under the hood. You might also notice a burning smell while driving.

» LEARN MORE: Signs of a bad valve cover gasket

Any time there is an emissions fault the check engine light will be displayed. The purpose of the check engine light is to inform the driver that an emission related fault has been found, and that there are on-board diagnostic (OBD) trouble codes stored in the powertrain or engine control module. Additionally, since the emissions systems are so intertwined into engine control and transmission control systems, symptoms may include nearly any sort of drivability concerns. This may include harsh shifting, failure to shift, hesitation on acceleration, jerking, engine failure to start or run, loss of power, or any number of other drivability issues.

What are the steps to diagnose and fix a vacuum leak in a 2006 INFINITI G35?

To effectively diagnose and fix a vacuum leak in your 2006 INFINITI G35, start by identifying the symptoms that may indicate a leak, such as rough idling, poor acceleration, or unusual hissing noises. Once you have noted these signs, proceed to locate the leak using tools like a vacuum gauge or smoke machine, focusing on areas such as vacuum hoses, the intake manifold, and throttle body gaskets. Inspect all vacuum hoses for any visible damage, ensuring that connections are tight and secure. Pay special attention to the intake manifold and throttle body gaskets, as wear in these areas can lead to significant air leaks. Additionally, test the brake booster by applying the brakes while the engine is running; a change in idle speed may suggest a leak. After identifying the source of the leak, repair or replace the affected components, ensuring that all connections are properly sealed to prevent future issues. By following this diagnostic approach, you can restore your vehicle's performance and efficiency.

What are the common problems that could cause a vacuum leak in a 2006 INFINITI G35?

When diagnosing a vacuum leak in a 2006 INFINITI G35, it's essential to understand the common problems that may be at play. One of the primary culprits is faulty vacuum hoses, which can deteriorate over time, leading to cracks or looseness that allow air to escape. Additionally, a damaged intake manifold gasket can create a significant leak, affecting engine performance. It's also important to check for cracked or improperly secured vacuum fittings, as these can easily lead to leaks in the vacuum system. Another potential issue is a faulty brake booster, which plays a crucial role in the vacuum system; if it malfunctions, it can contribute to a vacuum leak. Lastly, a malfunctioning Positive Crankcase Ventilation (PCV) valve can also be a source of leaks. Addressing these issues promptly is vital, as neglecting a vacuum leak can result in poor engine performance, rough idling, and decreased fuel efficiency. For those looking to tackle this problem themselves, a thorough inspection of these components can help identify the source of the leak and guide necessary repairs.

How urgent is it to repair a vacuum leak in a 2006 INFINITI G35?

Addressing a vacuum leak in your 2006 INFINITI G35 is not just a matter of convenience; it is a critical maintenance task that demands immediate attention. A vacuum leak can severely compromise engine performance, leading to symptoms such as rough idling, stalling, and a noticeable drop in fuel efficiency. These issues not only affect your driving experience but can also escalate into more serious problems if left unresolved. For instance, prolonged neglect of a vacuum leak can result in damage to essential components like the oxygen sensors and catalytic converter, which are costly to replace. Moreover, as the leak worsens over time, the repairs can become significantly more expensive, making it imperative to act quickly. By prioritizing the repair of a vacuum leak, you not only enhance your vehicle's performance but also safeguard against further damage and costly repairs down the line.

You’ve got options with RepairPal

Whether you need a more accurate auto repair estimate or help finding a reputable shop in your area, we’ve got you covered.