2019 Hyundai Sonata Has A Vacuum Leak

Diagnosing Vacuum Leaks in Your 2019 Hyundai Sonata: Symptoms, Causes, and Repair Solutions

Find Repair Location
Reviewed by
Devin Cabugcal
Written by RepairPal Car Genius
Updated January 14, 2025
0%
40% chance it's the
Leaking Vacuum Hoses
0%
30% chance it's the
Leaking Gaskets and Seals
0%
20% chance it's the
Bad Actuators and Valves
0%
10% chance it's
Something else
The most common reasons a 2019 Hyundai Sonata has a vacuum leak are leaking vacuum hoses, leaking gaskets and seals, or bad actuators and valves.
  • Leaking Vacuum Hoses: A cracked or disconnected vacuum hose can lead to a loss of engine vacuum, resulting in poor engine performance and increased fuel consumption.
  • Leaking Gaskets and Seals: Aged or damaged gaskets and seals can lead to fluid leaks, resulting in loss of engine oil or coolant and potential engine damage.
  • Bad Actuators and Valves: A malfunctioning actuator or valve can disrupt the proper operation of the vehicle's systems, leading to issues such as poor engine performance or erratic behavior of components like the HVAC system.
Proper diagnosis will determine the exact cause of your symptom, saving you money on unnecessary repairs. The diagnostic experts at RepairPal Certified shops have the right tools and experience to solve any symptom.

How much does it cost to fix a 2019 Hyundai Sonata has a vacuum leak?

Common Repairs

The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.

Problems with the intake manifold gasket can create the following symptoms:

  • Illuminated check engine light
  • Erratic engine performance
  • Oil and coolant leaks
  • Poor gas mileage
  • Stalling

» LEARN MORE: Intake manifold gasket symptoms

Rough idling, lack of power, engine oil leaks, engine burning oil, and illumination of the check engine light are all possible if the PCV valve has clogged. If the check engine light comes on, the on-board diagnostics (OBD) trouble codes will most likely relate to manifold vacuum, air and fuel mixture, PCV system, mass airflow sensor readings, and exhaust and emissions readings. These are all affected in the event the PCV valve is clogged, is stuck fully open, or is stuck fully closed, however, if the valve is stuck fully open, the engine oil seals are not in danger of overpressure.

A bad valve cover gasket will result in an oil leak. You may notice oil under the car or on other parts under the hood. You might also notice a burning smell while driving.

» LEARN MORE: Signs of a bad valve cover gasket

Any time there is an emissions fault the check engine light will be displayed. The purpose of the check engine light is to inform the driver that an emission related fault has been found, and that there are on-board diagnostic (OBD) trouble codes stored in the powertrain or engine control module. Additionally, since the emissions systems are so intertwined into engine control and transmission control systems, symptoms may include nearly any sort of drivability concerns. This may include harsh shifting, failure to shift, hesitation on acceleration, jerking, engine failure to start or run, loss of power, or any number of other drivability issues.

What are the steps to diagnose a vacuum leak in a 2019 Hyundai Sonata?

To effectively diagnose a vacuum leak in your 2019 Hyundai Sonata, begin with a thorough visual inspection of the vacuum hoses and connections. Look for any signs of wear, such as cracks or loose fittings, which could indicate a potential leak. Next, listen for any hissing sounds while the engine is running, as these can be telltale signs of escaping air. If you have access to a vacuum gauge, connect it to the intake manifold to check for fluctuations in vacuum pressure, as low readings may suggest a leak. Another practical method is to spray soapy water on the hoses and connections; if bubbles form, you’ve identified the leak's location. For a more advanced approach, consider performing a smoke test, which involves introducing smoke into the intake system to visually pinpoint the leak. Lastly, using an OBD-II scanner can help you retrieve any diagnostic trouble codes that may provide further insight into the issue. By following this structured diagnostic approach, you can systematically identify and address any vacuum leaks in your vehicle.

What are the common problems associated with vacuum leaks in a 2019 Hyundai Sonata?

When it comes to vacuum leaks in a 2019 Hyundai Sonata, several common problems can significantly impact the vehicle's performance. One of the most noticeable symptoms is rough idling, which manifests as an uneven engine rhythm when the car is stationary, often felt at stoplights or while parked. Additionally, vacuum leaks can lead to engine misfires, resulting in a lack of power and causing the vehicle to hesitate or jerk during acceleration. Drivers may also encounter the check engine light illuminating on the dashboard, a clear indicator that something requires attention. Furthermore, these leaks can disrupt the air-fuel mixture, leading to poor fuel efficiency and increased fuel consumption, which can strain your budget over time. In more severe cases, vacuum leaks may cause the engine to stall, particularly when the vehicle is idling or coming to a stop. Addressing these issues promptly is crucial to prevent further complications and maintain the overall health of your Hyundai Sonata. Regular inspections and maintenance can help identify vacuum leaks early, ensuring a smoother and more efficient driving experience.

How urgent is it to repair a vacuum leak in a 2019 Hyundai Sonata?

Repairing a vacuum leak in a 2019 Hyundai Sonata is an urgent matter that should not be overlooked. A vacuum leak can significantly impact your vehicle's performance, leading to symptoms such as rough idling, stalling, and decreased power, which can compromise your driving experience and safety. Moreover, if left unaddressed, a vacuum leak can cause further damage to critical engine components, resulting in more extensive and costly repairs down the line. Timely intervention not only helps maintain optimal fuel efficiency but also ensures the longevity of your engine. Therefore, if you suspect a vacuum leak, it is crucial to diagnose and repair the issue as soon as possible to avoid escalating problems and to keep your Sonata running smoothly.

You’ve got options with RepairPal

Whether you need a more accurate auto repair estimate or help finding a reputable shop in your area, we’ve got you covered.