The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.
When the throttle position sensor fails, the engine's computer tends to overcompensate with fuel, leading black exhaust coming from the tailpipe. There is a strong possibility of engine misfires, and the check engine light will come on.
Throttle position sensors can also develop "dead spots," or certain places along the throttle curve where it doesn't get a reading. When this happens, the above symptoms can occur but then stop when you further press or let off the gas pedal.
When the vehicle speed sensor fails or the wiring harness prevents signal transmission, the speedometer is the first thing that will stop functioning properly. This can be an intermittent issue where the speedometer only works occasionally, the speedometer may cease all function, or the speedometer may read erratically or incorrectly. Also, the traction control and anti lock brake warning lights specific to each vehicle may be illuminated, depending on the design of those systems. You may notice the vehicle hesitate to accelerate, cruise control will not function properly, and the vehicle may not shift properly through all of the gears.
In the event that a wheel speed sensor fails, the ABS, traction control system (TCS) and manufacturer specific stability control system lights will illuminate, informing the driver that the systems are disabled. The vehicle will be more prone to tire slip, and normal driving patterns may need to be adjusted to correct for the loss of computer control. On older vehicle's, the speedometer can be affected, causing illumination of the check engine light as well.
The cruise control switch can cause complete failure of the cruise control feature, but in a lucky scenario only partial functionality will be lost. This means that the cruise control may come on, but that it will not increase in speed automatically, or the cancel button does not work leading the driver to cancel cruise control with the foot brake. In some vehicles, the cruise control light may illuminate, or a warning message may be displayed due to lack of functionality.
To effectively diagnose the non-functioning cruise control in your 1999 Ford Expedition, begin with a methodical approach that emphasizes simplicity and efficiency. Start by checking the fuse associated with the cruise control system, as a blown fuse is a common and easily rectifiable issue. Next, inspect the cruise control buttons on the steering wheel to ensure they are operational, as faulty buttons can hinder engagement. Following this, examine the brake pedal switch, which is critical for the cruise control's functionality; any misalignment or malfunction here can prevent activation. Additionally, look for vacuum leaks within the system, as these can disrupt the necessary pressure for proper operation. Testing the speed sensor is also essential, as it relays vital information to the cruise control system; a malfunction here can lead to engagement problems. Finally, utilize a diagnostic scanner to check for any error codes that may provide insight into specific issues affecting the cruise control. By following this structured diagnostic approach, you can efficiently identify and address the underlying problems with your vehicle's cruise control system.
When dealing with cruise control issues in a 1999 Ford Expedition, it's essential to understand the common problems that may be at play. One of the first things to check is the fuse associated with the cruise control system; a blown fuse can easily disrupt its functionality. Additionally, the brake pedal switch is crucial, as it must function correctly to allow the cruise control to engage; if this switch is faulty, it may prevent the system from activating. Another critical component is the speed sensor, which is responsible for relaying the vehicle's speed to the cruise control system; any malfunction here can hinder the system's ability to maintain speed. Furthermore, vacuum leaks within the cruise control system can lead to a loss of functionality, so inspecting for any leaks is advisable. Lastly, the cruise control module itself may be defective, which could be the root cause of the problem. By systematically checking these components, you can effectively troubleshoot and potentially resolve the cruise control issues in your Ford Expedition.
When evaluating the urgency of repairing the non-functioning cruise control in a 1999 Ford Expedition, it is essential to recognize the potential safety risks associated with a malfunctioning system. A faulty cruise control can lead to unexpected acceleration or deceleration, which may compromise your ability to maintain control of the vehicle, particularly on long drives where fatigue can set in. Additionally, the convenience that cruise control offers during highway travel cannot be overlooked; it significantly enhances driving comfort by allowing the driver to relax their foot and maintain a steady speed without constant pedal pressure. Furthermore, from a financial perspective, ensuring that all vehicle features are operational can positively influence the resale value of your Expedition. Prospective buyers are often more inclined to purchase a vehicle that is in good working order, including all its systems. Therefore, while the cruise control issue may not seem immediately critical compared to other mechanical failures, addressing it promptly is advisable to ensure safety, enhance driving comfort, and protect the vehicle's value.
Not sure what's wrong?
Get help from a trusted expert
See what others are asking about their Ford Expedition. Get answers from RepairPal's community of auto experts and enthusiasts.
Read about related problems experienced by other Ford Expedition drivers like you.