2003 Ford Excursion Cruise Control Isn't Working

Common Causes of Cruise Control Malfunctions in Your 2003 Ford Excursion and How to Fix Them

Find Repair Location
Reviewed by
Aisha
Written by RepairPal Car Genius
Updated January 14, 2025
0%
30% chance it's the
Sensor
0%
25% chance it's the
Control Module
0%
25% chance it's the
Throttle
0%
20% chance it's
Something else
The most common reasons a 2003 Ford Excursion cruise control isn't working are failed control module, sensor or switch issues, or throttle actuation problems.
  • Sensor: A faulty or malfunctioning sensor can lead to incorrect readings, causing issues with engine performance or other systems relying on accurate data.
  • Control Module: A faulty control module can lead to erratic vehicle behavior or failure of various electronic systems due to improper signal processing.
  • Throttle: A faulty throttle body or a defective accelerator pedal position sensor may be causing inconsistent throttle response.
Proper diagnosis will determine the exact cause of your symptom, saving you money on unnecessary repairs. The diagnostic experts at RepairPal Certified shops have the right tools and experience to solve any symptom.

How much does it cost to fix a 2003 Ford Excursion cruise control isn't working?

Common Repairs

The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.

When the throttle position sensor fails, the engine's computer tends to overcompensate with fuel, leading black exhaust coming from the tailpipe. There is a strong possibility of engine misfires, and the check engine light will come on.

Throttle position sensors can also develop "dead spots," or certain places along the throttle curve where it doesn't get a reading. When this happens, the above symptoms can occur but then stop when you further press or let off the gas pedal.

In the event that a wheel speed sensor fails, the ABS, traction control system (TCS) and manufacturer specific stability control system lights will illuminate, informing the driver that the systems are disabled. The vehicle will be more prone to tire slip, and normal driving patterns may need to be adjusted to correct for the loss of computer control. On older vehicle's, the speedometer can be affected, causing illumination of the check engine light as well.

The cruise control switch can cause complete failure of the cruise control feature, but in a lucky scenario only partial functionality will be lost. This means that the cruise control may come on, but that it will not increase in speed automatically, or the cancel button does not work leading the driver to cancel cruise control with the foot brake. In some vehicles, the cruise control light may illuminate, or a warning message may be displayed due to lack of functionality.

What are the steps to diagnose the non-functioning cruise control in a 2003 Ford Excursion?

To diagnose the non-functioning cruise control in a 2003 Ford Excursion, begin with the simplest solutions before moving on to more complex checks. Start by inspecting the fuse associated with the cruise control system; a blown fuse is a common and easily fixable issue that can halt functionality. Next, examine the cruise control buttons on the steering wheel for any signs of damage or sticking, as these can prevent the system from engaging. If these initial checks do not resolve the problem, proceed to verify the vehicle's speed sensors, which are crucial for the cruise control to operate correctly. A malfunctioning speed sensor can disrupt the system's ability to maintain speed. Additionally, check the brake pedal switch, as a faulty or stuck switch can disable the cruise control entirely. If all these components appear to be functioning, it may be necessary to test the cruise control module itself, as it could be the source of the malfunction. Finally, using a diagnostic scanner to check for error codes can provide further insights into any underlying issues that may not be immediately apparent. By following this structured approach, you can effectively diagnose and potentially resolve the cruise control problem in your Ford Excursion.

What are the common problems that could cause the cruise control to stop working in a 2003 Ford Excursion?

When dealing with a malfunctioning cruise control system in a 2003 Ford Excursion, it's essential to understand the common problems that could be at play. One of the primary culprits is a failed control module, sensor, or switch, which can disrupt the system's functionality. Additionally, throttle actuation issues may prevent the cruise control from engaging properly. It's also wise to check for a blown fuse, as this can easily interrupt the electrical flow necessary for the system to operate. Another critical component to inspect is the brake pedal switch; if this switch is defective, it may inadvertently signal the cruise control to disengage. Furthermore, issues with the brake lights or a faulty brake switch can also contribute to the problem. Lastly, if the check engine light is illuminated, it may indicate underlying engine-related issues that could affect the cruise control system. By systematically checking these components, you can effectively diagnose and potentially resolve the cruise control malfunction on your own.

How urgent is it to address the non-functioning cruise control in a 2003 Ford Excursion?

Addressing a non-functioning cruise control in your 2003 Ford Excursion is crucial for several reasons. First and foremost, safety should be your top priority; a malfunctioning cruise control system can lead to erratic vehicle behavior, such as unexpected acceleration or deceleration, which poses significant risks, especially during highway driving. Additionally, the convenience that cruise control offers is invaluable during long trips, as it helps reduce driver fatigue and enhances overall comfort. Without this feature, you may find yourself more exhausted after extended periods behind the wheel. Furthermore, neglecting the issue could indicate deeper problems within your vehicle's electronic systems or engine, potentially leading to more severe and costly repairs down the line. Therefore, it is essential to address the non-functioning cruise control as soon as possible to ensure both your safety and the longevity of your vehicle.

You’ve got options with RepairPal

Whether you need a more accurate auto repair estimate or help finding a reputable shop in your area, we’ve got you covered.